.png){kind=icon}
返回
Phosphate Sensor Using Molybdenum
.png){kind=icon}
PRE
AI
DOI：10.1149/2.0161609jes.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Aphosphate ion-selective electrode (ISE) based on molybdenum was developed, which is based on the reaction between molybdenum and hydrogen phosphate ions (HPO42-) in alkaline condition. We found that the electrode showed a near Nernst characteristics with a slope of -26.9 +/- 0.5 mV/decade. Potential linear range is from 10(-1) M to 10(-5) M and detection limit is 1.9 x 10(-6) M in the pH of 8.5. The short response time for HPO42- ions indicates its fast response characteristic. The ISE can be used over a period of three months with good reproducibility and selectivity. The manufacture process of the ISE is easy and inexpensive. It can be applied to quantitative analysis of phosphate in water. (C) 2016 The Electrochemical Society. All rights reserved.
Keyword:
CARBON-PASTE ELECTRODE
INORGANIC-PHOSPHATE
IONIC LIQUID
COBALT FILM
MICROELECTRODE
FABRICATION
PHOSPHORUS
MEMBRANE
SILICATE
PYRUVATE
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
