arrow
返回

Pipe radius estimation using Kinect range cameras

delete2019-03-01
delete16
delete
OA
AI
M
Mohammad Nahangi *
T
Thomas Czerniawski
C
Carl T. Haas
S
Scott Walbridge
DOI:10.1016/j.autcon.2018.12.015delete
delete原文链接
delete分享
delete收藏
查看原文
摘要

摘要

En 中文
In the heavy construction industry, pipe spool assembly is geometrically complex and suboptimal fabrication processes inevitably lead to fabrication errors and costly rework. In an attempt to mitigate fabrication risks and improve product quality, computer aided tools are being developed to provide an additional layer of control. In this paper, the data acquisition capabilities of two low-cost range cameras are investigated for the eventual purpose of pipe fitting process monitoring in a smart fabrication facility environment. Range images of various pipes are systematically taken at varying distances from the sensor. By using the proposed radius estimation algorithm, the utility of the data for accurate geometrical pipe feature detection is evaluated by a radius feature metric. Results show that the algorithm reliably extracts radius information from point clouds representing piping. In conjunction with the algorithm, the low-cost range camera hardware was able to characterize pipes, of radius ranging from 2.41 cm to 8.78 cm at a distance from the sensor ranging from 0.5 m to 3.75 m, with an average error of 18% for Kinect 1 and 10% for Kinect 2.
Keyword:
Pipe spool
Radius
Kinect
Curvature
Fabrication control
Assembly control
Visual sensing
AI总结

AI总结

对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。

期刊

Automation in Construction 封面图
Automation in Construction
IF:
11.5
论文数:
6.3K
被引数:
5.7W

机构

U
university of texas system
学者数:
1.1K
论文数: 2.5K
被引数: 11.2W
U
University of Toronto
学者数:
6.1K
论文数: 2.1K
被引数: 8.4W
U
university of texas - austin
学者数:
2
论文数: 1
被引数: 0
学者 查看更多机构
引用论文

引用论文

Measuring the Impact of Rework on Construction Cost Performance
err2009-03-01
err252
PREAI
errHwang, Bon-Gang; Thomas, Stephen R.; Haas, Carl T.; Caldas, Carlos H.
err分享
err收藏
err分享
err收藏
Automated dimensional quality assurance of full-scale precast concrete elements using laser scanning and BIM
err2016-12-01
err198
PREAI
errKim, Min-Koo; Wang, Qian; Park, Joon-Woo; Cheng, Jack C. P.; Sohn, Hoon; Chang, Chih-Chen
err分享
err收藏
Evaluation of accuracy of as-built 3D modeling from photos taken by handheld digital cameras
err2012-12-01
err126
PREAI
errBhatla, Ankit; Choe, Soo Young; Fierro, Oscar; Leite, Fernanda
err分享
err收藏
Pipe spool recognition in cluttered point clouds using a curvature-based shape descriptor
err2016-11-01
err69
PREAI
errCzerniawski, Thomas; Nahangi, Mohammad; Haas, Carl; Walbridge, Scott
err分享
err收藏
学者 查看更多内容