返回
Planar SOFC system modelling and simulation including a 3D stack module
DOI:10.1016/j.ijhydene.2015.12.076.png)
摘要
En 中文
A solid oxide fuel cell (SOFC) system consists of a fuel cell stack with its auxiliary components. Modelling an entire SOFC system can be simplified by employing standard process flowsheeting software. However, no in-built SOFC module exists within any of the commercial flowsheet simulators. In Amiri et al. (Comput. Chem. Eng., 2015, 78:10-23), a rigorous SOFC module was developed to fill this gap. That work outlined a multi-scale approach to SOFC modelling and presented analyses at compartment, channel and cell scales. The current work extends the approach to stack and system scales. Two case studies were conducted on a simulated multilayer, planar SOFC stack with its balance of plant (BoP) components. Firstly, the effect of flow maldistribution in the stack manifold on the SOFC's internal variables was examined. Secondly, the interaction between the stack and the BoP was investigated through the effect of recycling depleted fuel. The results showed that anode gas recycling could be used for managing the gradients within the stack, while also improving fuel utilisation and water management. Copyright (C) 2015, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.
Keyword:
SOFC
System
Stack
Balance of plant
Aspen Plus
AI总结
对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
8.3
论文数:
5.4W
被引数:
23.1W
机构
引用论文
Computer simulation of a biomass gasification-solid oxide fuel cell power system using Aspen Plus
ENERGY
IF9.4
3D modeling of anode-supported planar SOFC with internal reforming of methane具有甲烷内部重整的阳极支撑平面SOFC的3D建模
Review on modeling development for multiscale chemical reactions coupled transport phenomena in solid oxide fuel cells固体氧化物燃料电池多尺度化学反应耦合输运现象建模进展综述
APPLIED ENERGY
IF11

