返回
PMSM Parameter Estimation for Sensorless FOC Based on Differential Power Factor
DOI:10.1109/TIM.2021.3096861.png)
摘要
En 中文
During the last years, different methods for identifying permanent magnet synchronous motor (PMSM) parameters have been developed. Such methods allow a better characterization of PMSMs, thus enabling a better control. This article presents a novel PMSM parameter estimation method based on the differential power factor due to the harmonic distortion, which allows the identification of the motor parameters from data acquisitions representing the entire torque-speed range. This method does not require measuring any geometric parameters, thus avoiding motor disassembly, or prior knowledge of the applied field oriented control (FOC) strategy. It also enables identifying the current, voltage, and dq components of the flux linkage without knowing the rotor position. The proposed method is based on a dq electrical model that considers the harmonic components of the electrical magnitudes. It avoids to apply any optimization technique, thus requiring a low computational burden. The method is first validated experimentally by comparing the identified dq current space vector against the acquired one using a resolver associated with a commercial drive. Finally, it is further validated by using a second PMSM associated with a sensorless drive, comparing the identified dq inductances with ground truth data obtained by a validated method.
Keyword:
Field oriented control (FOC)
parameter estimation
performance analysis
performance evaluation
permanent magnet machines
system identification
期刊
IF:
5.9
论文数:
2.0W
被引数:
5.8W
机构
引用论文
Robust Speed Regulation for PMSM Servo System With Multiple Sources of Disturbances via an Augmented Disturbance Observer基于增广扰动观测器的多扰动源永磁同步电机伺服系统鲁棒调速
Sensorless PMSM Drive Based on Stator Feedforward Voltage Estimation Improved With MRAS Multiparameter Estimation基于MRAS多参数估计改进的定子前馈电压估计的无传感器PMSM驱动
Identification of the Magnetic Model of Permanent-Magnet Synchronous Machines Using DC-Biased Low-Frequency AC Signal Injection使用直流偏置的低频交流信号注入识别永磁同步电机的磁模型
Online Identification of Intrinsic Load Current Dependent Position Estimation Error for Sensorless PMSM Drives无传感器永磁同步电机固有负载电流相关位置估计误差的在线辨识
IEEE ACCESS
IF3.6
A Comprehensive Review of State-of-the-Art Parameter Estimation Techniques for Permanent Magnet Synchronous Motors in Wide Speed Range宽调速范围内永磁同步电动机最新参数估计技术的综合评述

