arrow
返回

Poly (lactic acid) blends: Processing, properties and applications

delete2019-03-01
delete555
PRE
AI
M
Mohammadreza Nofar *
P
Pierre J. Carreau
M
Musa R. Kamal
M
Marie‐Claude Heuzey
DOI:10.1016/j.ijbiomac.2018.12.002delete
delete原文链接
delete原文求助
delete分享
delete收藏
摘要

摘要

En 中文
Poly (lactic acid) or polylactide (PLA) is a commercial biobased, biodegradable, biocompatible, compostable and non-toxic polymer that has competitive material and processing costs and desirable mechanical properties. Thereby, it can be considered favorably for biomedical applications and as the most promising substitute for petroleum-based polymers in a wide range of commodity and engineering applications. However, PLA has some significant shortcomings such as low melt strength, slow crystallization rate, poor processability, high brittleness, low toughness, and low service temperature, which limit its applications. To overcome these limitations, blending PLA with other polymers is an inexpensive approach that could also tailor the final properties of PLA-based products. During the last two decades, researchers investigated the synthesis, processing, properties, and development of various PLA-based blend systems including miscible blends of poly L-lactide (PLLA) and poly D-lactide (PDLA), which generate stereocomplex crystals, binary immiscible/miscible blends of PLA with other thermoplastics, multifunctional ternary blends using a third polymer or fillers such as nanoparticles, as well as PLA-based blend foam systems. This article reviews all these investigations and compares the syntheses/processing-morphology-properties interrelationships in PLA-based blends developed so far for various applications. (C) 2018 Elsevier B.V. All rights reserved.
Keyword:
Poly(lactic acid)
Polylactide
PLA
Stereocomplex
Multiphase
Blend
Binary
Ternary
Composite
Nanocomposite
Foam
Review
AI总结

AI总结

对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。

期刊

International Journal of Biological Macromolecules 封面图
International Journal of Biological Macromolecules
IF:
8.5
论文数:
5.1W
被引数:
21.7W

机构

U
universite de montreal
学者数:
4.6W
论文数: 3.8W
被引数: 46
P
Polytechnique Montreal
学者数:
3.7K
论文数: 3.4K
被引数: 42
I
Istanbul Technical University
学者数:
8.9K
论文数: 7.8K
被引数: 7.9K
学者 查看更多机构
引用论文

引用论文

Assessing the thermoformability of poly(3-hydroxybutyrate-co-3hydroxyvalerate)/poly(acid lactic) blends compatibilized with diisocyanates
err2017-09-01
err30
errOAAI
errGonzalez-Ausejo, Jennifer; Sanchez-Safont, Estefania; Maria Lagaron, Jose; Olsson, Richard T.; Gamez-Perez, Jose; Cabedo, Luis
err分享
err收藏
err分享
err收藏
Towards Realistic 3D Models of Tumor Vascular Networks
err2023-11-09
err0
errOAAI
errMax C. Lindemann; Lukas Glänzer; Anjali A. Roeth; Thomas Schmitz-Rode; Ioana Slabu
err分享
err收藏
err分享
err收藏
Inactivation of Shigella flexneri by 405-nm Light-Emitting Diode Treatment and Possible Mechanism of Action
err2022-05-01
err0
PREAI
errYiwen Wang; Pengfei Ge; Xi Guo; Yifei He; Xintong Han; Xiaoli Peng; Yutang Wang; Xiaodong Xia; Chao Shi
err分享
err收藏
学者 查看更多内容