返回
Polyethylene glycol/polylactic acid block co-polymers as solid-solid phase change materials
DOI:10.1002/smm2.1188.png)
摘要
En 中文
Phase change materials (PCMs) are promising thermal energy storage materials due to their high specific latent heat. Conventional PCMs typically exploit the solid-liquid (s-l) transition. However, leakage and leaching are common issues for solid-liquid PCMs, which have to be addressed before usage in practical applications. In contrast, solid-solid (s-s) PCMs would naturally overcome these issues due to their inherent form stability and homogeneity. In this study, we report a new type of s-s PCM based on chemically linked polyethylene glycol (PEG, the PCM portion) with polylactic acid (PLA, the support portion) in the form of a block co-polymer. Solid-solid latent heat of up to 56 J/g could be achieved, with melting points of between 44 degrees C and 55 degrees C. For comparison, PEG was physically mixed into a PLA matrix to form a PEG:PLA composite. However, the composite material saw leakage of up to 9% upon heating, with a corresponding loss in thermal storage capacity. In contrast, the mPEG/PLA block co-polymers were found to be completely homogeneous and thermally stable even when heated above its phase transition temperature, with no observable leakage, demonstrating the superiority of chemical linking strategies in ensuring form stability.
Keyword:
block co-polymer
chemically linked
form-stable
phase change material (PCM)
polyethylene glycol (PEG)
polylactic acid (PLA)
solid-solid transition
AI总结
对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
12.8
论文数:
386
被引数:
2.5K
机构
引用论文
Phase II Trial of Preoperative Chemoradiation in Patients With Localized Gastric Adenocarcinoma (RTOG 9904): Quality of Combined Modality Therapy and Pathologic Response局部胃腺癌患者术前放化疗的II期试验 (RTOG 9904): 综合疗法的质量和病理反应
Inter-rater reliability of manual and automated region-of-interest delineation for PiB PET
NeuroImage
IF0
Emerging Solid-to-Solid Phase-Change Materials for Thermal-Energy Harvesting, Storage, and Utilization用于热能收集,存储和利用的新兴固体到固体相变材料
ADVANCED MATERIALS
IF26.8
Preparation and characterization of melamine/formaldehyde/polyethylene glycol crosslinking copolymers as solid-solid phase change materials三聚氰胺/甲醛/聚乙二醇交联共聚物固-固相变材料的制备与表征
Reactive high-spin iron(IV)-oxo sites through dioxygen activation in a metal–organic framework通过金属有机框架中的双氧活化反应高自旋铁 (IV)-氧位
Science
IF0

