.png){kind=icon}
返回
Polymer microfluidic devices
.png){kind=icon}
PRE
AI
DOI：10.1016/S0039-9140(01)00594-X.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Since the introduction of lab-on-a-chip devices in the early 1990s, glass has been the dominant substrate material for their fabrication (J. Chromatogr. 593 (1992) 253; Science 261 (1993) 895). This is primarily driven by the fact that fabrication methods were well established by the semiconductor industry, and surface properties and derivatization methods were well characterized and developed by the chromatography industry among others. Several material properties of glass make it a very attractive material for use in microfluidic systems; however, the cost of producing systems in glass is driving commercial producers to seek other materials. Commercial manufacturers of microfluidic devices see many benefits in employing plastics that include reduced cost and simplified manufacturing procedures, particularly when compared to glass and silicon. An additional benefit that is extremely attractive is the wide range of available plastic materials which allows the manufacturer to choose materials' properties suitable for their specific application. In this article, we present a review of polymer-based microfluidic systems including their material properties, fabrication methods, device applications, and finally an analysis of the market that drives their development. (C) 2002 Elsevier Science B.V. All rights reserved.
Keyword:
microfabrication
polymer
microfluidics
chip
