返回
Polymer modified bitumen: Optimization and selection
DOI:10.1016/j.matdes.2014.05.009.png)
摘要
En 中文
Polymer modification of bitumen has been commonly performed since the 1980s in order to decrease bitumen (and pavement) susceptibility to high and low temperatures, allowing reduction in common failure mechanisms as rutting and cracking. Bitumen modification has been commonly performed by addition of thermoplastic or elastomeric polymers. However, there are just a few studies on bitumen blends using multiple materials, seeking for specific advantages provided by addition of these modifiers. This work describes the results obtained after the preparation of multicomponent polymer-bitumen blends (MC) based on an 80/100 penetration grade bitumen with varying amounts of (i) Polyethylene wax (PW); (ii) Styrene-Butadiene-Styrene copolymer (SBS); and (iii) crumb rubber (CR). Ideal blends depending on the amount of polymer modifiers added were found by using an experimental design procedure. It was possible to propose charts allowing optimizing and selecting appropriate polymer modified bitumens (PMB) depending on target properties for a given application by following Ashby's materials selection methodology. (C) 2014 Elsevier Ltd. All rights reserved.
Keyword:
Polymer modified Bitumen
Polymers
Crumb rubber
Materials selection
Materials optimization
AI总结
对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
M
IF:
7.9
论文数:
1.9W
被引数:
12.5W
机构
引用论文
Effects of the manufacturing process on the performances of the bituminous binders modified with EVA生产工艺对EVA改性沥青结合料性能的影响
Asphalt modified by styrene-butadiene-styrene triblock copolymer: Morphology and model苯乙烯-丁二烯-苯乙烯三嵌段共聚物改性沥青: 形态和模型
Rheological properties of styrene butadiene styrene polymer modified road bitumens苯乙烯-丁二烯-苯乙烯聚合物改性道路沥青的流变性能
FUEL
IF7.5

