返回
Portable RDFT-Based EIS System Design With a Low-Complexity Impedance Calculation
DOI:10.1109/TIM.2023.3277929.png)
摘要
En 中文
This article presents a novel low-complexity impedance calculation based on a compact recursive discrete Fourier transform (RDFT) for electrical impedance spectroscopy (EIS) system design. Compared to a traditional fast Fourier transform (FFT), an arbitrary-length RDFT is not limited by the power-of-two transform length. By choosing a suitable integer ratio of the desired frequency/frequency resolution, the spectrum leakage can be significantly reduced by 4-Hz resolution per bin, which enables a lower magnitude relative error (MRE) and a phase absolute error (PAE) in impedance calculations. Here, the practical measurement results show that the maximum MRE and PAE are below 0.1% and 0.5?, respectively, making this approach superior to previously reported ones. Compared with the state-of-the-art Goertzel filter-based EIS system, the proposed method provides more frequency bins (+43.75%) within the same frequency band, and the operations in terms of square root, division, and arctangent are drastically reduced by 50%, 33%, and 50%, respectively. In addition, the proposed system only costs $474 USD and can serve as a suitable solution for various EIS applications in the future.
Keyword:
Impedance
Frequency measurement
Impedance measurement
Discrete Fourier transforms
Computer architecture
System analysis and design
Low-pass filters
Battery performance
biosensor
discrete Fourier transform (DFT)
electrical impedance spectroscopy (EIS)
fast impedance calculation
期刊
IF:
5.9
论文数:
2.0W
被引数:
5.8W
机构
引用论文
Electrochemical Impedance Spectroscopy and its Applications in Sensor Development and Measuring Battery Performance电化学阻抗谱及其在传感器研制和电池性能测试中的应用
IEEE SENSORS JOURNAL
IF4.5
Critical Review on the Battery State of Charge Estimation Methods for Electric Vehicles电动汽车电池荷电状态估计方法综述
IEEE ACCESS
IF3.6
Online EIS and Diagnostics on Lithium-Ion Batteries by Means of Low-Power Integrated Sensing and Parametric Modeling通过低功耗集成传感和参数建模对锂离子电池进行在线EIS和诊断

