Powder-based 3D printing for bone tissue engineering

doi:10.1016/j.biotechadv.2016.03.009

2016-09-01

230

AndreaAltobrando (Adriano Piattelli)

Barbara Zavan

Eriberto Bressan

DOI：10.1016/j.biotechadv.2016.03.009

原文链接

查看原文

摘要

En 中文

Bone tissue engineered 3-D constructs customized to patient-specific needs are emerging as attractive biomimetic scaffolds to enhance bone cell and tissue growth and differentiation. The article outlines the features of the most common additive manufacturing technologies (3D printing, stereolithography, fused deposition modeling, and selective laser sintering) used to fabricate bone tissue engineering scaffolds. It concentrates, in particular, on the current state of knowledge concerning powder-based 3D printing, including a description of the properties of powders and binder solutions, the critical phases of scaffold manufacturing, and its applications in bone tissue engineering. Clinical aspects and future applications are also discussed. (C) 2016 Elsevier Inc. All rights reserved.

Keyword:

3D printing

Bone

Scaffold

Additive manufacturing technologies

Powder

Binder

Depowdering

Sintering

AI总结

对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。

期刊

Biotechnology Advances

IF:

12.5

论文数:

3.0K

被引数:

2.7W

机构

University of Padua

学者数:

5.1W

论文数: 4.3W

被引数: 57

g d'annunzio university of chieti-pescara

学者数:

1.0W

论文数: 7.5K

被引数: 8

引用论文

Synthese und Struktur eines zweikernigen Gadolinium(III)‐Komplexes: Magnetische Austauschwechselwirkungen in alkoxyverbrückten Komplexen der Lanthanoiden

Zeitschrift für anorganische und allgemeine Chemie

IF0

2004-11-09

PREAI

Winfried Plass; Guido Fries

Chemoenzymatic methods for the enantioselective preparation of sesquiterpenoid natural products from aromatic precursors

Pure and Applied Chemistry

IF0

2009-01-01

OAAI

M. G. Banwell; A. J. Edwards; G. J. Harfoot; K. A. Jolliffe; M. D. McLeod; K. J. McRae; S. G. Stewart; M. Vögtle

A Smart Multisensor Approach to Assist Blind People in Specific Urban Navigation Tasks 一种智能多传感器方法，可帮助盲人完成特定的城市导航任务

IEEE Transactions on Neural Systems and Rehabilitation Engineering

IF0

2008-12-01

PREAI

B. Ando

Microwave-processed nanocrystalline hydroxyapatite: Simultaneous enhancement of mechanical and biological properties

ACTA BIOMATERIALIA

IF9.6

2010-09-01

172

OAAI

Bose, Susmita; Dasgupta, Sudip; Tarafder, Solaiman; Bandyopadhyay, Amit

Craniofacial vertical bone augmentation: A comparison between 3D printed monolithic monetite blocks and autologous onlay grafts in the rabbit

BIOMATERIALS

IF12.9

2009-10-01

127

OAAI

Tamimi, Faleh; Torres, Jesus; Gbureck, Uwe; Lopez-Cabarcos, Enrique; Bassett, David C.; Alkhraisat, Mohammad H.; Barralet, Jake E.

Simultaneous Immobilization of Bioactives During 3D Powder Printing of Bioceramic Drug-Release Matrices

ADVANCED FUNCTIONAL MATERIALS

IF19

2010-05-25

PREAI

Vorndran, Elke; Klammert, Uwe; Ewald, Andrea; Barralet, Jake E.; Gbureck, Uwe

Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering 用于骨组织工程的可生物降解和生物活性多孔聚合物/无机复合支架

BIOMATERIALS

IF12.9

2006-06-01

3.4K

PREAI

Rezwan, K; Chen, QZ; Blaker, JJ; Boccaccini, AR

Ceramic scaffolds produced by computer-assisted 3D printing and sintering: characterization and biocompatibility investigations

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS

IF3.4

2010-01-20

180

PREAI

Warnke, Patrick H.; Seitz, Hermann; Warnke, Frauke; Becker, Stephan T.; Sivananthan, Sureshan; Sherry, Eugene; Liu, Qin; Wiltfang, Joerg; Douglas, Timothy

Low temperature fabrication of magnesium phosphate cement scaffolds by 3D powder printing

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE

IF4.5

2010-08-26

108

PREAI

Klammert, Uwe; Vorndran, Elke; Reuther, Tobias; Mueller, Frank A.; Zorn, Katharina; Gbureck, Uwe

Electronic interactions in diyne Co2(CO)6 complexes

Inorganica Chimica Acta

IF0

1996-06-01

PREAI

Noel Duffy; John McAdam; Carlo Nervi; Domenico Osella; Mauro Ravera; Brian Robinson; Jim Simpson

查看更多内容