返回
Power decoupling method for synchronous reference frame-based vector control
DOI:10.1016/j.ijepes.2024.110429.png)
摘要
En 中文
This short communication analyzes the power coupling mechanism of synchronous reference frame-based vector control (SRF-VC) of voltage source inverter (VSI), which is caused by the variation of voltage angle difference (VVAD) between voltage at point of common coupling (PCC) and grid voltage. Then, a power closed loop transfer function model is proposed to study the power coupling characteristics. It reveals that when there is an increase of output real power, the VSI will absorb coupling reactive power from power grids which will limit its real power transfer capability and even cause transient instability. Next, a power decoupling strategy for SRF-VC is proposed based on a dynamic feedforward power compensation (DFPC) algorithm, and its power decoupling capability is analyzed based on the transfer function. Simulations and experimental results show that the proposed method can not only reduce power coupling magnitudes in transient stage, but also realize power ripple cancellation in quasi-steady state.
Keyword:
Dynamic feedforward power compensation
Power decoupling
Variation of voltage angle difference
Voltage source inverter
期刊
I
IF:
5
论文数:
1.1W
被引数:
3.1W
机构
引用论文
Power Decoupling Method for Voltage Source Inverters Using Grid Voltage Modulated Direct Power Control in Unbalanced System不平衡系统中采用电网电压调制直接功率控制的电压源逆变器功率解耦方法
Transient Stability Analysis and Control Design of Droop-Controlled Voltage Source Converters Considering Current Limitation考虑电流限制的下垂控制电压源换流器暂态稳定性分析与控制设计
Adaptive Reactive Power Control of PV Power Plants for Improved Power Transfer Capability Under Ultra-Weak Grid Conditions超弱电网条件下提高功率输送能力的光伏电站自适应无功控制

