.png){kind=icon}
返回
Predicting elastic strain fields in defective microstructures using image colorization algorithms
.png){kind=icon}
OA
AI
DOI：10.1016/j.commatsci.2020.110068.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
In this work, an image colorization algorithm based on convolutional neural networks is explored as an approach to predict tensile plane-strain field components of microstructures featuring porosity defects. For the same, microstructures featuring porosity of various shapes, sizes, area fractions and number densities were sampled on the gage section of ASTM-E8 sized numerical specimens whose tensile deformation was simulated in plane strain mode using commercial finite element analysis package Abaqus. Subsequently, the image colorization algorithm was trained by treating the microstructure featuring porosity defects as the gray scale image, and its strain field components as its color layers, analogous to the red-green-blue color components of traditional digital representations of images. Towards the same, various CNN frameworks were tested for optimization of its parameters, viz. number of layers, number of filters in each layer, stride, padding, and activation function. An optimized CNN framework is presented that is able to predict strain fields on randomly sampled microstructures with high accuracy R-2 > 0.91 at a fraction of the time that finite element analysis would take. Various cross-validation tests were performed to test the accuracy and robustness of the CNN in learning features of various microstructures. Results indicated that the CNN algorithm is extremely robust and can provide near-accurate strain fields in generic scenarios.
Keyword:
Convolutional neural network
Strain fields
Finite element analysis
Porosity defects
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
3.3
论文数:
1.3W
被引数:
3.6W
机构
引用论文
Searching for exotic particles in high-energy physics with deep learning用深度学习寻找高能物理中的奇异粒子.png)
NATURE COMMUNICATIONS
NATURE COMMUNICATIONSIF15.7
PREAI
分享收藏Effect of building direction on porosity and fatigue life of selective laser melted AlSi12Mg alloyMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSINGIF7
PREAI
分享收藏The use of artificial neural networks in materials science based researchMATERIALS & DESIGN
MATERIALS & DESIGNIF7.9
PREAI
分享收藏Controlling of residual stress in additive manufacturing of Ti6Al4V by finite element modeling通过有限元建模控制Ti6Al4V增材制造中的残余应力ADDITIVE MANUFACTURING
ADDITIVE MANUFACTURINGIF11.1
PREAI
分享收藏
查看更多内容