.png){kind=icon}
返回
Predicting octane number from microscale flame dynamics
.png){kind=icon}
OA
AI
DOI：10.1016/j.combustflame.2019.06.019.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
The standard method for measuring the octane number of fuels requires large sample volumes (similar to 1L) and access to a Cooperative Fuel Research (CFR) engine. This method reliably quantifies the knock resistance of fuels in spark ignition engines, however the large sample volume requirement prevents testing of new experimental fuels (often produced in quantities of just similar to 1 mL), and the large equipment size impedes mobile, decentralized testing of remote fuel supplies. When direct measurements of octane number are impractical, other methods are needed. Micro flow reactors have shown promise in measuring ignition characteristics that are sensitive to octane number, and they are compact and operate on small volumes (similar to 1 mL). This study uses simulations to demonstrate that measurements of the unsteady flame dynamics in a micro flow reactor can provide valuable data for accurate octane number predictions. Simulations of the flow reactor are used to obtain ignition characteristics for over 200 ethanol-toluene primary reference fuels (ETPRF) and 21 biofuel blends. A feed forward neural network is trained using the micro flow reactor ignition characteristics, fuel properties, and known research octane number (RON) and motor octane number (MON) for the ETPRF fuels. The neural network is able to predict the RON and MON of the biofuel blends to within 2 octane number on average. Prediction results are compared to other methods available in the literature. Additional neural network models are trained that show improved prediction accuracy as additional fuel training data becomes available. (C) 2019 The Combustion Institute. Published by Elsevier Inc. All rights reserved.
Keyword:
Micro flow reactor
Flames with repetitive extinction and Ignition (FREI)
Fuel testing
Octane number
Neural network
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
6.2
论文数:
9.8K
被引数:
4.2W
机构
引用论文
Study on combustion and ignition characteristics of natural gas components in a micro flow reactor with a controlled temperature profile.png)
COMBUSTION AND FLAME
COMBUSTION AND FLAMEIF6.2
PREAI
分享收藏A linear-by-mole blending rule for octane numbers of n-heptane/iso-octane/toluene mixtures正庚烷/异辛烷/甲苯混合物辛烷值的摩尔线性混合规则FUEL
FUELIF7.5
PREAI
分享收藏Study on octane number dependence of PRF/air weak flames at 1-5 atm in a micro flow reactor with a controlled temperature profileCOMBUSTION AND FLAME
COMBUSTION AND FLAMEIF6.2
PREAI
分享收藏分享收藏Electromagnetic and nuclear fission of238U in the reaction of 100, 500, and 1000 A�MeV208Pb with238U100，500和1000 a？MeV208Pb与238u的反应中238u的电磁和核裂变
PREAI
分享收藏Ignition delay time sensitivity in ignition quality tester (IQT) and its relation to octane sensitivityFUEL
FUELIF7.5
PREAI
分享收藏
查看更多内容