.png){kind=icon}
返回
Printable hexagonal boron nitride ionogels
.png){kind=icon}
PRE
AI
DOI：10.1039/c9fd00113a.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Due to its excellent chemical/thermal stability and mechanical robustness, hexagonal boron nitride (hBN) is a promising solid matrix material for ionogels. While bulk hBN ionogels have been employed in macroscopic applications such as lithium-ion batteries, hBN ionogel inks that are compatible with high-resolution printing have not yet been realized. Here, we describe aerosol jet-printable ionogels using exfoliated hBN nanoplatelets as the solid matrix. The hBN nanoplatelets are produced from bulk hBN powders by liquid-phase exfoliation, allowing printable hBN ionogel inks to be formulated following the addition of an imidazolium ionic liquid and ethyl lactate. The resulting inks are reliably printed with variable patterns and controllable thicknesses by aerosol jet printing, resulting in hBN ionogels that possess high room-temperature ionic conductivities and storage moduli of >3 mS cm(-1) and >1 MPa, respectively. By integrating the hBN ionogel with printed semiconductors and electrical contacts, fully-printed thin-film transistors with operating voltages below 1 V are demonstrated on polyimide films. These devices exhibit desirable electrical performance and robust mechanical tolerance against repeated bending cycles, thus confirming the suitability of hBN ionogels for printed and flexible electronics.
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
3.1
论文数:
4.4K
被引数:
1.0W
机构
引用论文
Progress toward development of all-printed RFID tags:: Materials, processes, and devices.png)
PROCEEDINGS OF THE IEEE
PROCEEDINGS OF THE IEEEIF25.9
PREAI
分享收藏Performance evaluation criteria for use of enhanced heat transfer surfaces in heat exchanger design在换热器设计中使用强化传热表面的性能评估标准
PREAI
分享收藏Conductive-on-demand: Tailorable polyimide/carbon nanotube nanocomposite thin film by dual-material aerosol jet printingCARBON
CARBONIF11.6
PREAI
分享收藏Preparation of Active Layers in Polymer Solar Cells by Aerosol Jet Printing气溶胶喷射打印制备聚合物太阳能电池活性层
PREAI
分享收藏Fabrication and processing of polymer solar cells: A review of printing and coating techniques聚合物太阳能电池的制造和加工: 印刷和涂层技术综述
PREAI
分享收藏分享收藏
查看更多内容