.png){kind=icon}
返回
Pulsed eddy currents testing using a planar matrix probe
.png){kind=icon}
PRE
AI
DOI：10.1016/j.measurement.2015.09.026.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
This paper presents a new planar matrix eddy currents probe intended for non-destructive testing. The proposed design is composed by multiple independent excitation traces and a matrix of independent sensing coils. Finite element modeling is used to highlight the probe operating principle and to preview its behavior in different measurement conditions. Dedicated on-probe electronics were designed to cope with the requirements of the new probe. Multiple pulse generators are used to drive the excitation traces and a multiplexer enables the selection of the different sensing coils being measured. The sensing coils output voltages are amplified, acquired and digitally processed with an FPGA-based embedded device. Processing of the probe response signals to the pulsed excitation is accomplished in the frequency domain using a dedicated FFT core in the FPGA. The proposed probe and electronics system enables two modes of operation. In the first mode, the probe can be operated selecting a combination of excitation traces to drive and sensing coils to read while is being moved on the tested part. In the second mode of operation, the probe is handheld positioned to measure a specific region and a sequence of measurements are triggered by the user. These measurements results can be arranged to form a color map where the defects can be identified. (C) 2015 Elsevier Ltd. All rights reserved.
Keyword:
Non-destructive testing
Pulsed eddy currents testing
Differential planar matrix probe
FEM simulations
FPGA based embedded measurement system
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
5.6
论文数:
2.0W
被引数:
5.4W
机构
引用论文
.png){kind=icon}
Eddy current measurements of electrical conductivity and magnetic permeability of porous metals
PREAI
分享收藏
Research on edge identification of a defect using pulsed eddy current based on principal component analysis基于主成分分析的脉冲涡流缺陷边缘识别研究
PREAI
分享收藏
查看更多内容