.png){kind=icon}
返回
Quantifying photon counting detector (PCD) performance using PCD-CT images
.png){kind=icon}
PRE
AI
DOI：10.1002/mp.17701.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
BackgroundPhoton counting detector CTs (PCD-CTs) have recently been introduced to clinical imaging. This development creates a new need for end-users to quantify and monitor the physical performance of PCDs. Traditionally, the characterization of PCD performance relied on detector counts, which are typically accessible to the manufacturer but are not usually available to clinical end-users.PurposeThe goal of this work was to develop a new method for quantifying PCD performance using reconstructed PCD-CT images, without requiring access to the PCD counts.MethodsThe proposed method is based on a set of closed-form relationships that connect PCD-CT image noise, the PCD deadtime (tau$\tau$), and the zero-frequency detective quantum efficiency (DQE0${\rm DQE}_0$) of PCDs. At a low tube current (mA) level, the mean output counts of the PCD were estimated by fitting the measured PCD-CT noise power spectrum (NPS) to a parametric model. DQE0${\rm DQE}_0$ was then calculated by normalizing the estimated mean detector counts to the expected input x-ray photon number. To estimate tau$\tau$, the image variance of PCD-CT was measured at different mA levels. A novel quantitative relationship between PCD-CT image variance, tau$\tau$, and mA was employed to estimate tau$\tau$ through parametric fitting. The method was validated using both simulated and experimental PCD-CT data, covering a range of tau$\tau$, DQE0${\rm DQE}_0$, and system geometries.ResultsFor the simulated curved-detector PCD-CT, the estimation errors for DQE0${\rm DQE}_0$ and deadtime were -3.7% and 0.5%, respectively. For the simulated collinear-detector PCD-CT, the estimation errors for DQE0${\rm DQE}_0$ and deadtime were -3.3% and -1.0%, respectively. For the experimental collinear-detector PCD-CT, the estimation errors for DQE0${\rm DQE}_0$ and deadtime were -2.6% and 1.6%, respectively.ConclusionsBy analyzing the variance and NPS of PCD-CT images, DQE0${\rm DQE}_0$ and deadtime of scanner's PCD can be accurately estimated, without access to raw detector counts or projection data.
Keyword:
CT image quality
photon counting detector
photon counting detector CT
期刊
IF:
3.2
论文数:
3.7W
被引数:
3.2W
机构
引用论文
Vision 20/20: Single photon counting x-ray detectors in medical imaging视觉20/20: 医学成像中的单光子计数x射线探测器.png)
MEDICAL PHYSICS
OAAI
MEDICAL PHYSICSIF3.2
OAAI分享收藏分享收藏Nature of polarization in wide-bandgap semiconductor detectors under high-flux irradiation:: Application to semi-insulating Cd1-xZnxTePHYSICAL REVIEW B
PHYSICAL REVIEW BIF3.7
PREAI
分享收藏Performance evaluation of single- and dual-contrast spectral imaging on a photon-counting-detector CT在光子计数探测器CT上进行单对比和双对比光谱成像的性能评估MEDICAL PHYSICS
MEDICAL PHYSICSIF3.2
PREAI
分享收藏
查看更多内容