返回
Quasi-Optimal Solution for Data-Driven Final State Control Based on Data-Driven Prediction
DOI:10.1016/j.ifacol.2025.10.177.png)
摘要
En 中文
In control systems that require moving a target object from its current position to a desired position as quickly as possible-such as hard disk drives, galvanometer scanners, and semiconductor exposure systems-feedforward (FF) input design becomes critically important. For this purpose, a final-state control (FSC) method can be applied, which determines an FF input that transitions the system state from an initial state to an arbitrary final state within a finite number of steps via straightforward matrix operations. Recently, data-driven control methods have attracted increasing attention, and the author previously proposed a data-driven FSC method based on data-driven prediction. However, that method cannot obtain an optimal solution. To address this issue, this study proposes a method for deriving a quasi-optimal solution using initial experimental data that is significantly longer than the FSC input. Specifically, data segments of the same length as the FSC input are extracted from arbitrary positions within the initial data, and FSC inputs satisfying both the initial and final conditions are derived from these segments. By varying the extraction positions and repeating the process, a set of FSC inputs is generated. The quasi-optimal FSC input is then obtained as a linear combination of FSC inputs in this set. Finally, numerical simulations demonstrate that the FSC input derived using the proposed method closely matches the optimal FSC input computed from the plant's state-space model with sufficient accuracy. Copyright (c) 2025 The Authors. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0/)
Keyword:
Final-state control
data-driven control
data-driven prediction
optimal solution
期刊
I
IF:
0
论文数:
985
被引数:
0
机构
引用论文
A New Approach to Update of Feedfoward Controller in the Two-degree-of-freedom Control System — A Proposal of Estimated Response Iterative Tuning (ERIT) —一种更新两自由度控制系统前馈控制器的新方法——提出估计响应迭代整定(ERIT)方法——
Fast and Precise Positioning Using LMI-Based Command Shaping Considering Stand Vibration Suppression
没有更多内容

