返回
Re alloying-driven stacking fault energy decrease enabled strength-ductility synergy in NiCoCrFe high-entropy alloys
DOI:10.1016/j.msea.2023.145368.png)
摘要
En 中文
Metallic materials have long been enslaved in the dilemma of strength-ductility trade-off, which limits their potential applications. Here, we report on a new class of non-equiatomic Re-added Ni-Co-Cr-Fe face-centered cubic (FCC) high-entropy alloys (HEAs) with superior yield strength to those of Mo-added and other FCC HEAs without compromising ductility. The strengthening mechanisms of these HEAs were discussed in detail by experimental observation of the recrystallized microstructure, dislocation configuration and deformation substructure combined with theoretical evaluation of yield stress and stacking fault energy (SFE). It has been clarified that the unique work-hardening capacity and deformability of these HEAs is attributed to solid solution strengthening and the grain boundary strengthening caused by refined crystalline on the one hand. And what's more important, the appropriate addition of Re greatly reduces SFE so as to modulate the dislocation slip and dissociation behavior and promote phase transformation. It has been confirmed that the plastic deformation process was controlled by abundant microbands, multiple nanoscale deformation twins and phase transformation in the Re-added HEAs.
Keyword:
High-entropy alloys
Strength-ductility
Microbanding
Twinning
Phase transition
期刊
机构
暂无机构信息
引用论文
The influence of hard-baking temperature applied for SU8 sensor layer on the sensitivity of capacitive chemical sensorSU8传感器层硬焙温度对电容式化学传感器灵敏度的影响
Effects of Cr/Ni ratio on physical properties of Cr-Mn-Fe-Co-Ni high-entropy alloysCr/Ni比对cr-mn-fe-co-ni高熵合金物理性能的影响
ACTA MATERIALIA
IF9.3
Simultaneous twinning and microband formation under dynamic compression in a high entropy alloy with a complex energetic landscape
ACTA MATERIALIA
IF9.3
Design of non-equiatomic high entropy alloys with heterogeneous lamella structure towards strength-ductility synergy具有异质层状结构的非等原子高熵合金的强度-延展性协同设计
SCRIPTA MATERIALIA
IF5.6
Deformation mechanisms of Mo alloyed FeCoCrNi high entropy alloy: In situ neutron diffraction
ACTA MATERIALIA
IF9.3
Achieving exceptional strength-ductility synergy in a complex-concentrated alloy via architected heterogeneous grains and nano-sized precipitates通过结构化的异质晶粒和纳米尺寸的析出物在复杂浓缩的合金中实现卓越的强度-延展性协同
Quantitative experimental determination of the solid solution hardening potential of rhenium, tungsten and molybdenum in single-crystal nickel-based superalloys
ACTA MATERIALIA
IF9.3

