Rectangular Improvement Method for Plan View Pattern of Plates During the Angular Rolling Process

Chunyu He

doi:10.3390/ma17235964

2024-12-05

DOI：10.3390/ma17235964

原文链接

查看原文

摘要

En 中文

The effect of the angular rolling process on the plan view pattern of a plate was studied, and the rectangular influencing factors and improvement methods for this process were proposed in this paper. DEFORM (v11.0) finite element software was used to simulate the processes of conventional rolling and angular rolling, and the degree of rectangularity of plates under different rolling process conditions was compared. A formula to characterize the degree of rectangularity of plates was established; the closer this value is to one, the better the degree of rectangularity. Considering the actual rolling process conditions, the range of theoretically calculated rectangular rotation angles was extended to obtain the optimum rectangular rotation angle using the finite element simulation method. In the two-pass angular rolling process, the optimal rectangular angle of the second pass was 14.275 degrees when the first pass was 15 degrees. The optimal rectangular angle of the plate was 19.008 degrees when the first pass' angle was 20 degrees. Two-pass angular rolling is different to four-pass rolling, and the simulation results showed that J 15 degrees 4 (1.0012) was less than J 15 degrees 2 (1.0015) and J 20 degrees 4 (1.0034) was less than J 20 degrees 2 (1.0055). The rectangularity degree of the four-pass process was better than the two-pass process. Angular rolling experiments were carried out, and the actual data show that the characteristic rectangular value of the rolled piece was 1.003 during the four-pass process and 1.014 during the two-pass process. This verified that separating the one-group two-pass angular rolling process from the one-group four-pass angular rolling process can improve the rectangular degree of the rolled plate, thereby increasing the yield rate. This provides a theoretical basis for industrial applications.

Keyword:

plate

angular rolling

rectangular

numerical simulation

experimental study