返回
Reliability based design optimization for a rock tunnel support system with multiple failure modes using response surface method
DOI:10.1016/j.tust.2017.06.017.png)
摘要
En 中文
Reliability-based design optimization (RBDO) is applied to a rock tunnel support system, considering the ground support interaction and the parametric uncertainties. Both reliability index approach (RIA) and performance measure approach (PMA) are employed as the RBDO algorithms. The first-order reliability method (FORM) and the response surface method (RSM) are used to perform the reliability analysis. The shotcrete thickness and its installation position are considered as two design variables to be optimized in an illustrative example of a circular rock tunnel. The influence of the two design variables on the reliability results is first investigated with respect to three failure modes, namely, the support capacity criterion, the tunnel convergence criterion and the rockbolt length criterion. Then, the proposed RBDO procedure is used to seek for the design variables of minimum shotcrete thickness and the optimal installation position for the rock tunnel example. The computational efficiency and stability between RIA and PMA are compared. The influences of the rock mass quality, the variation of the shotcrete thickness and the target reliability requirement on the optimized results are also investigated and discussed.
Keyword:
Tunnel
RBDO
Multiple failure modes
Response surface method
FORM
AI总结
对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
7.4
论文数:
7.1K
被引数:
3.5W
机构
引用论文
Probabilistic Analysis of Circular Tunnels in Homogeneous Soil Using Response Surface Methodology基于响应面法的均质土中圆形隧道概率分析
A hybrid approach combining uniform design and support vector machine to probabilistic tunnel stability assessment均匀设计和支持向量机相结合的隧道稳定性概率评估方法
STRUCTURAL SAFETY
IF6.3
Probabilistic analysis of underground rock excavations using response surface method and SORM基于响应面法和SORM的地下岩石开挖概率分析

