.png){kind=icon}
返回
Reliability-based topology optimization of double layer grids using a two-stage optimization method
.png){kind=icon}
PRE
AI
DOI：10.1007/s00158-011-0744-6.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
This paper presents a two-stage optimization method for reliability-based topology optimization (RBTO) of double layer grids that considers uncertainties in applied loads. The optimization is performed using a two-stage optimization by employing the method of moving asymptotes (MMA) and ant colony optimization (ACO), which is called MMA-ACO method. For implementation of MMA-ACO, the structural stiffness is maximized using MMA, first. Then, the results of MMA are used to enhance ACO through the following four modifications: (I) finding the structural importance rate of elements or joints and using this to achieve a better topology, (II) determining the number of compressive and tensile element types, (III) changing the lower limit of available cross-sectional areas for the elements of each group and (IV) modifying the generation of random stable structures. In reliability analysis, multiple criteria i.e. stiffness and eigenvalue are considered where the probability of failure in each mode is calculated by Monte Carlo simulation (MCS). To reduce the computational time, the eigenvalues are evaluated using the third order approximation (TOA). Through numerical examples, reliability-based topology designs of typical double layer grids are obtained by ACO and MMA-ACO methods. The numerical results reveal the computational advantages and effectiveness of the proposed MMA-ACO method for the RBTO of double layer grids. Also, the importance of considering uncertainties is then demonstrated by comparing the results obtained by those of other failure probabilities.
Keyword:
Double layer grids
Reliability-based topology optimization
Method of moving asymptotes
Ant colony optimization
Monte Carlo simulation
Third order approximation
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
4
论文数:
4.9K
被引数:
1.7W
机构
引用论文
.png){kind=icon}
Level set based robust shape and topology optimization under random field uncertainties随机场不确定性下基于水平集的鲁棒形状和拓扑优化
PREAI
分享收藏A new artificial neural network-based response surface method for structural reliability analysis
PREAI
分享收藏A fast approximate method for parameter sensitivity estimation in Monte Carlo structural reliability蒙特卡洛结构可靠性参数灵敏度估计的快速近似方法
PREAI
分享收藏Non-probabilistic reliability-based topology optimization of geometrically nonlinear structures using convex models基于凸模型的几何非线性结构的非概率可靠性拓扑优化
PREAI
分享收藏
查看更多内容