Reliability modeling-based tolerance design and process parameter analysis considering performance degradation

Xuefeng Kong

doi:10.1016/j.ress.2020.107343

2021-03-01

PRE

DOI：10.1016/j.ress.2020.107343

原文链接

原文求助

摘要

En 中文

Tolerance design and process parameter analysis have been widely used for reducing the fluctuation of product quality characteristics (QCs). Most existing works focus on finding the best compromise between manufacturing cost and tolerance of QCs. However, the performance degradation of products will lead to QCs deviating from design specifications, which is ignored in current researches. Motivated by the stress relaxation process of helical springs, we propose a more reliable tolerance design and process parameter analysis considering performance degradation. An accelerated degradation model is first constructed to reflect the degradation process of helical springs and the influence of the initial free length. Subsequently, considering the given reliability constraint, a tolerance design method based on degradation performance is developed to guide the quality improvement of helical springs. Furthermore, a new reliability model embodied with the influence of parameter fluctuation is proposed, and an allowable fluctuation range for the deviation and variance of the initial free length is derived, based on which the process parameter can be optimized to improve the manufacturing process. Finally, a real case study of helical springs is conducted to illustrate the implementation and effectiveness of the proposed method.

Keyword:

Quality improvement

Tolerance design

Process parameter analysis

Helical springs

Reliability modeling

AI总结

对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。

期刊

Reliability Engineering and System Safety

IF:

论文数:

9.0K

被引数:

4.2W

机构

Beihang University

学者数:

5.2W

论文数: 4.1W

被引数: 37

sichuan university

学者数:

12.1W

论文数: 7.8W

被引数: 100

引用论文

Prediction of solidification behaviour and microstructure of Ni based alloys obtained by casting and direct additive laser growth

Materials Science and Technology

IF0

2016-05-01

PREAI

A. Y. Travyanov; P. V. Petrovskiy; G. A. Turichin; E. V. Zemlyakov; M. Kovac; S. Vondracek; A. Kondratiev; A. V. Khvan; V. V. Cheverikin; D. O. Ivanov; I. A. Bazhenova; A. T. Dinsdale

How to walk carrying a huge egg? Trade‐offs between locomotion and reproduction explain the special pelvis and leg anatomy in kiwi (Aves;Apteryxspp.)

Journal of Anatomy

IF0

2019-08-20