.png){kind=icon}
返回
Rule-Based Fuzzy Controller for Solid State Transfer Switch Towards Fast Sensitive Loads Transfer
.png){kind=icon}
PRE
AI
DOI：10.1109/TIA.2022.3146100.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
This article deals with the development of an intelligent fuzzy logic controller for solid-state transfer switch toward fast fault detection and power transfer to the alternative feeder. A set of fuzzy rules are developed for the controller which in turn shift the loads from the preferred feeder to the alternate feeder with quality power resolving fault interruption or voltage sags. The voltage and the current control loop generate a signal to the fuzzy control block to provide an on or off pulse for the switches upon activate fuzzy rules in the interference engine. In this article, a compilation of 35%, 50%, 70%, and 100% faults are created to demonstrate the effectiveness of the proposed fuzzy controller toward detecting fault levels and transferring power to the desired feeder. It was discovered that the proposed fuzzy logic controller detects faults in the range of 0.054 to 0.061 milliseconds and transfers power in the range of 1.742 to 3.107 ms, which is significantly faster and more reliable than the existing literature.
Keyword:
Switches
Thyristors
Power quality
Control systems
Voltage control
Resistance
Fuzzy logic
Fault analysis
fault detection
feeder
fuzzy logic
power quality
solid-state transfer switch (SSTS) system
switches
期刊
IF:
4.5
论文数:
1.1W
被引数:
3.5W
机构
引用论文
.png){kind=icon}
分享收藏分享收藏分享收藏
查看更多内容