返回
Sector Piezoelectric Sensor Array Transmitter Beamforming MUSIC Algorithm Based Structure Damage Imaging Method
DOI:10.3390/s20051265.png)
摘要
En 中文
Elastic-wave-based structural health monitoring technology has a broad application potential for its sensitivity and ability to achieve regional monitoring. For structures with large damping and specific shapes, the traditional damage monitoring method is limited by the sensor arrangement area and affected by low signal-to-noise ratios, so it is difficult to accurately locate the damage in a structure. To solve this problem, this paper proposed a damage monitoring method based on a sector piezoelectric sensor array for multiple signal classification algorithm. By arranging two sector piezoelectric sensor arrays that are suitable for a specific structure, the damage scattering array signal under the multi-excitation source was obtained and synthesized, the signal-to-noise ratios were improved, and the damage location accuracy was thus improved. The effectiveness of the method was verified by monitoring the damage in a circular bonded structure with a metal ring. Compared with the damage localization methods based on the traditional single excitation source multiple signal classification algorithm, path imaging and delay-sum imaging, this method can achieve better damage location and has a higher localization accuracy.
Keyword:
structural health monitoring
elastic wave
sensor array
transmitter beamforming
multiple signal classification algorithm
AI总结
对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
3.5
论文数:
7.2W
被引数:
20.9W
机构
引用论文
Influence of the PZT Sensor Array Configuration on Lamb Wave Tomography Imaging with the RAPID Algorithm for Hole and Crack Detection
SENSORS
IF3.5
On-Line Corrosion Monitoring of Plate Structures Based on Guided Wave Tomography Using Piezoelectric Sensors
SENSORS
IF3.5

