.png){kind=icon}
返回
Selective core-shell doping enabling high performance 4.6 V-LiCoO2
.png){kind=icon}
PRE
AI
DOI：10.1016/j.jechem.2024.04.004.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Constructing robust surface and bulk structure is the prerequisite for realizing high performance high voltage LiCoO2 (LCO). Herein, we manage to synthesize a surface Mg -doping and bulk Al -doping coreshell structured LCO, which demonstrates excellent cycling performance. Half -cell shows 94.2% capacity retention after 100 cycles at 3.0-4.6 V (vs. Li/Li+) cycling, and no capacity decay after 300 cycles for fullcell test (3.0-4.55 V). Based on comprehensive microanalysis and theoretical calculations, the degradation mechanisms and doping effects are systematically revealed. For the undoped LCO, high voltage cycling induces severe interfacial and bulk degradations, where cracks, stripe defects, fatigue H2 phase, and spinel phase are identified in grain bulk. For the doped LCO, Mg -doped surface shell can suppress the interfacial degradations, which not only stabilizes the surface structure by forming a thin rock -salt layer but also significantly improves the electronic conductivity, thus enabling superior rate performance. Bulk Al -doping can suppress the lattice breathing effect and the detrimental H3 to H1-3 phase transition, which minimizes the internal strain and defects growth, maintaining the layered structure after prolonged cycling. Combining theoretical calculations, this work deepens our understanding of the doping effects of Mg and Al, which is valuable in guiding the future material design of high voltage LCO. (c) 2024 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by ELSEVIER B.V. and Science Press. All rights reserved.
Keyword:
Lithium-ion battery
Doping effect
Failure mechanism
High-voltage LiCoO2
Electron microscopy
期刊
IF:
14.9
论文数:
6.4K
被引数:
4.5W
机构
引用论文
Reviving lithium cobalt oxide-based lithium secondary batteries-toward a higher energy density复兴锂钴氧化物基锂二次电池-迈向更高的能量密度
PREAI
分享收藏Methods to obtain excellent capacity retention in LiCoO2 cycled to 4.5 V在循环至4.5 V的LiCoO2中获得优异容量保持率的方法.png)
ELECTROCHIMICA ACTA
ELECTROCHIMICA ACTAIF5.6
PREAI
分享收藏Trace doping of multiple elements enables stable battery cycling of LiCoO2 at 4.6V多种元素的痕量掺杂可使LiCoO2在4.6V下稳定电池循环NATURE ENERGY
OAAI
NATURE ENERGYIF60.1
OAAI分享收藏Origins of capacity and voltage fading of LiCoO2 upon high voltage cycling高压循环后LiCoO2的容量和电压衰减的起源
PREAI
分享收藏Fluorinated Solid-Electrolyte Interphase in High-Voltage Lithium Metal Batteries高电压锂金属电池中的氟化固体电解质界面JOULEOAAI
JOULEIF35.4
OAAI分享收藏Enabling high-performance 4.6 V LiCoO2 in a wide temperature range via a synergetic strategy通过协同策略在宽温度范围内实现高性能4.6 V LiCoO2ECOMATOAAI
ECOMATIF12.6
OAAI分享收藏A climbing image nudged elastic band method for finding saddle points and minimum energy paths寻找鞍点和最小能量路径的爬山图像微弹弹性带方法
PREAI
分享收藏
查看更多内容