返回
Sequencing batch-reactor control using Gaussian-process models
DOI:10.1016/j.biortech.2013.03.138.png)
摘要
En 中文
This paper presents a Gaussian-process (GP) model for the design of sequencing batch-reactor (SBR) control for wastewater treatment. The GP model is a probabilistic, nonparametric model with uncertainty predictions. In the case of SBR control, it is used for the on-line optimisation of the batch-phases duration. The control algorithm follows the course of the indirect process variables (pH, redox potential and dissolved oxygen concentration) and recognises the characteristic patterns in their time profile. The control algorithm uses GP-based regression to smooth the signals and GP-based classification for the pattern recognition. When tested on the signals from an SBR laboratory pilot plant, the control algorithm provided a satisfactory agreement between the proposed completion times and the actual termination times of the biodegradation processes. In a set of tested batches the final ammonia and nitrate concentrations were below 1 and 0.5 mg L-1, respectively, while the aeration time was shortened considerably. (C) 2013 Elsevier Ltd. All rights reserved.
Keyword:
Wastewater treatment
Biological nitrogen removal
Real-time control
Signal smoothing
Pattern recognition
AI总结
对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
9
论文数:
3.2W
被引数:
17.3W
机构
引用论文
Optimization of a sequencing batch reactor for biological nitrogen removal序批式生物脱氮反应器的优化
WATER RESEARCH
IF12.4
Experimental design of an optimal phase duration control strategy used in batch biological wastewater treatment
ISA TRANSACTIONS
IF6.5
Biological nitrogen removal with a real-time control strategy using moving slope changes of pH(mV)- and ORP-time profiles
WATER RESEARCH
IF12.4

