.png){kind=icon}
返回
Sequential process optimization for a digital light processing system to minimize trial and error
.png){kind=icon}
OA
AI
DOI：10.1038/s41598-022-17841-5.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
In additive manufacturing, logical and efficient workflow optimization enables successful production and reduces cost and time. These attempts are essential for preventing fabrication problems from various causes. However, quantitative analysis and integrated management studies of fabrication issues using a digital light processing (DLP) system are insufficient. Therefore, an efficient optimization method is required to apply several materials and extend the application of the DLP system. This study proposes a sequential process optimization (SPO) to manage the initial adhesion, recoating, and exposure energy. The photopolymerization characteristics and viscosity of the photocurable resin were quantitatively analyzed through process conditions such as build plate speed, layer thickness, and exposure time. The ability of the proposed SPO was confirmed by fabricating an evaluation model using a biocompatible resin. Furthermore, the biocompatibility of the developed resin was verified through experiments. The existing DLP process requires several trials and errors in process optimization. Therefore, the fabrication results are different depending on the operator's know-how. The use of the proposed SPO enables a systematic approach for optimizing the process conditions of a DLP system. As a result, the DLP system is expected to be more utilized.
Keyword:
MICROFLUIDIC DEVICES
CURE DEPTH
3D
STEREOLITHOGRAPHY
PHOTOPOLYMERIZATION
PROJECTION
FABRICATION
CHEMISTRY
COMPLEX
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
3.9
论文数:
28.0W
被引数:
83.5W
机构
引用论文
A Smart Multisensor Approach to Assist Blind People in Specific Urban Navigation Tasks一种智能多传感器方法，可帮助盲人完成特定的城市导航任务
PREAI
分享收藏3D Printing for the Clinic: Examining Contemporary Polymeric Biomaterials and Their Clinical Utility.png)
BIOMACROMOLECULESOAAI
BIOMACROMOLECULESIF5.4
OAAI分享收藏3D Printing of Poly(propylene fumarate) Oligomers: Evaluation of Resin Viscosity, Printing Characteristics and Mechanical PropertiesBIOMACROMOLECULES
BIOMACROMOLECULESIF5.4
PREAI
分享收藏3D-printing of transparent bio-microfluidic devices in PEG-DAPeg-da中透明生物微流控器件的3d打印LAB ON A CHIPOAAI
LAB ON A CHIPIF5.4
OAAI分享收藏
查看更多内容