.png){kind=icon}
返回
Shaping ceramics through indirect selective laser sintering
.png){kind=icon}
OA
AI
DOI：10.1108/RPJ-10-2014-0143.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Purpose - The purpose of this paper is to compare different powder metallurgy (PM) processes to produce ceramic parts through additive manufacturing (AM). This creates the potential to rapidly shape ceramic parts with an almost unlimited shape freedom. In this paper, alumina (Al2O3) parts are produced, as Al2O3 is currently the most commonly used ceramic material for technical applications. Design/methodology/approach - Variants of the following PM route, with indirect selective laser sintering (indirect SLS) as the AM shaping step, are explored to produce ceramic parts: powder synthesis, indirect SLS, binder removal and furnace sintering and alternative densification steps. Findings - Freeform-shaped Al2O3 parts with densities up to approximately 90 per cent are obtained. Research limitations/implications - The resulting Al2O3 parts contain inter-agglomerate pores. To produce higher-quality ceramic parts through indirect SLS, these pores should be avoided or eliminated. Originality/value - The research is innovative in many ways. First, composite powders are produced using different powder production methods, such as temperature-induced phase separation and dispersion polymerization. Second, four different binder materials are investigated: polyamide (nylon-12), polystyrene, polypropylene and a carnauba wax-low-density polyethylene combination. Further, to produce ceramic parts with increased density, the following densification techniques are investigated as additional steps of the PM process: laser remelting, isostatic pressing and infiltration.
Keyword:
Polymers
Selective laser sintering
Advanced manufacturing technologies
Ceramics
Powder metallurgy
Post-processing
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
3.6
论文数:
2.2K
被引数:
7.7K
机构
引用论文
分享收藏Biological evaluation of an apatite-mullite glass-ceramic produced via selective laser sintering.png)
ACTA BIOMATERIALIA
ACTA BIOMATERIALIAIF9.6
PREAI
分享收藏Reintroduction of Oxaliplatin: A Viable Approach to the Long-Term Management of Metastatic Colorectal CancerOncology
OncologyIF0
PREAI
分享收藏The dairy calf mortality : the causes of calf death during ten years at a large dairy farm in Korea
OAAI
OAAI分享收藏Additive manufacturing of alumina parts by indirect selective laser sintering and post processing
PREAI
分享收藏
查看更多内容