.png){kind=icon}
返回
Silicon IC process compatible thin metal film post-processing module
.png){kind=icon}
PRE
AI
DOI：10.1016/S0924-4247(98)00051-X.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
A thin metal film post-processing module, compatible with standard IC processing, is presented. The module is based on lift-off technique and enables integration of thin metal film structures with standard microelectronic processing. A wide range of metals can be used and the technique is intended for fabrication of integrated thin metal film transducers. Typical for the module are the flexibility of metal used, the flexibility of deposition order and the low temperature at which deposition takes place. As the thermal budget of the electronics remains unaffected and the standard IC process remains intact, full compatibility is assured. Application of the module is demonstrated by fabrication of low temperature coefficient of resistance (low-TCR) NiCr resistors (minimum width 1 mu m, thickness 35-75 nm, resistivity 120 mu Omega cm and TCR 40 x 10(-6) K-1) and Pt/Ti resistors for on-chip local temperature measurement (Pt/Ti 80 nm/20 nm, matching Pt-100 within 2.5%). (C) 1998 Elsevier Science S.A. All rights reserved.
Keyword:
thin metal films
IC process compatibility
post-processing
NiCr
lift-off etching
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
4.9
论文数:
1.5W
被引数:
3.3W
机构
暂无机构信息
引用论文
.png){kind=icon}
What Does the Yield Curve Tell Us about the Federal Reserve's Implicit Inflation Target?收益率曲线能告诉我们关于联邦储备局隐含的通胀目标什么信息？
OAAI
OAAI分享收藏
查看更多内容