.png){kind=icon}
返回
Simulation and Experimental Study of Laser Processing NdFeB Microarray Structure
.png){kind=icon}
OA
AI
DOI：10.3390/mi14040808.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
NdFeB materials are widely used in the manufacturing of micro-linear motor sliders due to their excellent permanent magnetic properties. However, there are many challenges in processing the slider with micro-structures on the surface, such as complicated steps and low efficiency. Laser processing is expected to solve these problems, but few studies have been reported. Therefore, simulation and experiment studies in this area are of great significance. In this study, a two-dimensional simulation model of laser-processed NdFeB material was established. Based on the overall effects of surface tension, recoil pressure, and gravity, the temperature field distribution and morphological characteristics with laser processing were analyzed. The flow evolution in the melt pool was discussed, and the mechanism of microstructure formation was revealed. In addition, the effect of laser scanning speed and average power on machining morphology was investigated. The results show that at an average power of 8 W and a scanning speed of 100 mm/s, the simulated ablation depth is 43 mu m, which is consistent with the experimental results. During the machining process, the molten material accumulated on the inner wall and the outlet of the crater after sputtering and refluxing, forming a V-shaped pit. The ablation depth decreases with the increment of the scanning speed, while the depth and length of the melt pool, along with the height of the recast layer, increase with the average power.
Keyword:
NdFeB
laser processing
simulation
microstructure formation mechanism
melt pool flow evolution
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
3
论文数:
1.4W
被引数:
2.9W
机构
引用论文
Applicability of UL 4600 to Unmanned Aircraft Systems (UAS) and Urban Air Mobility (UAM)UL 4600对无人机系统（UAS）和城市空中交通（UAM）的适用性
PREAI
分享收藏Experimental analysis and predictive modelling of Ti6Al4V laser surface texturing for biomedical applications用于生物医学应用的Ti6Al4V激光表面纹理的实验分析和预测模型OAAI
OAAI分享收藏Effects of laser scanning speeds on different states of the molten pool during selective laser melting: Simulation and experiment.png)
MATERIALS & DESIGNOAAI
MATERIALS & DESIGNIF7.9
OAAI分享收藏
查看更多内容