返回
Single-Phase Split-Inductor Differential Boost Inverters
DOI:10.1109/TPEL.2019.2913750.png)
摘要
En 中文
In this paper, two single-phase single-stage split-inductor buck-boost inverters are proposed: type-I and II. The proposed type-I is unity power factor inverter, while the proposed type-II inverter is suitable for any power factor. Both topologies remove the shoot-through problem. Furthermore, the reverse recovery issues for all switches are eliminated; therefore, MOSFETs are used to obtain higher efficiencies. The proposed inverters operated at higher switching frequencies confer the additional benefit of smaller passive components. The current stresses of the two switches in the proposed type-I and II inverters are lower of the conventional boost inverter. The dead time can be eliminated at both the high and line switching frequencies. In addition, the inductor conduction loss is minimized to improve efficiency. Moreover, the voltage stresses of the two switches in the type-I inverter can be much lower of its counterpart boost inverter. Most importantly, unlike the conventional high-reliability inverters, the magnetic volume of the proposed high-reliability type-I and II inverters is same of its counterpart boost inverter. The experimental results obtained for 500 W, 110 Vrms, 60 Hz hardware prototypes verify the analysis.
Keyword:
Buck-boost inverter
efficiency
lowcurrent stress
low-voltage stress
magnetic volume
reliability
single stage
split inductor
AI总结
对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
6.5
论文数:
1.7W
被引数:
8.3W
机构
引用论文
High Reliability and Efficiency Single-Phase Transformerless Inverter for Grid-Connected Photovoltaic Systems用于光伏并网系统的高可靠性和高效率单相无变压器逆变器

