返回
Single-Station Coda Wave Interferometry: A Feasibility Study Using Machine Learning
DOI:10.3390/ma14133451.png)
摘要
En 中文
Coda wave interferometry usually is applied with pairs of stations analyzing the signal transmitted from one station to another. A feasibility study was performed to evaluate if one single station could be used. In this case, the reflected coda wave signal from a zone to be identified was analyzed. Finite-difference simulations of wave propagation were used to study whether ultrasonic measurements could be used to detect velocity changes in such a zone up to a depth of 1.6 m in a highly scattering medium. For this aim, 1D convolutional neural networks were used for prediction. The crack density, the crack length, and the intrinsic attenuation were varied in the considered background material. The influence of noise and the sensor width was elaborated as well. It was shown that, in general, the suggested single-station approach is a possible way to identify damage zones, and the method was robust against the studied variations. The suggested workflow also took advantage of machine-learning techniques, and can be transferred to the detection of defects in concrete structures.
Keyword:
coda waves
reflection
machine learning
wave propagation
feasibility study
AI总结
对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
3.2
论文数:
5.8W
被引数:
15.1W
机构
引用论文
Finite-difference modeling of viscoelastic and anisotropic wave propagation using the rotated staggered grid
GEOPHYSICS
IF3.2
Processing Ultrasonic Data by Coda Wave Interferometry to Monitor Load Tests of Concrete Beams通过尾波干涉法处理超声波数据以监测混凝土梁的载荷测试
SENSORS
IF3.5

