返回
SOFC system with integrated catalytic fuel processing
DOI:10.1016/S0378-7753(99)00496-6.png)
摘要
En 中文
In recent years, there has been much interest in the development of solid oxide fuel cell technology operating directly on hydrocarbon fuels. The development of a catalytic fuel processing system, which is integrated with the solid oxide fuel cell (SOFC) power source is outlined here. The catalytic device utilises a novel three-way catalytic system consisting of an in situ pre-reformer catalyst, the fuel cell anode catalyst and a platinum-based combustion catalyst. The three individual catalytic stages have been tested in a model catalytic microreactor. Both temperature-programmed and isothermal reaction techniques have been applied. Results from these experiments were used to design the demonstration SOFC unit. The apparatus used for catalytic characterisation can also perform in situ electrochemical measurements as described in previous papers [C.M. Finnerty, R.H. Cunningham, K. Kendall, R.M. Ormerod, Chem. Commun. (1998) 915-916; C.M. Finnerty, N.J. Coe, R.H. Cunningham, R.M. Ormerod, Catal. Today 46 (1998) 137-145]. This enabled the performance of the SOFC to be determined at a range of temperatures and reaction conditions, with current output of 290 mA cm(-2) at 0.5 V, being recorded. Methane and butane have been evaluated as fuels. Thus, optimisation of the in situ partial oxidation pre-reforming catalyst was essential, with catalysts producing high H-2/CO ratios at reaction temperatures between 873 K and 1173 K being chosen. These included Ru and Ni/Mo-based catalysts. Hydrocarbon fuels were directly injected into the catalytic SOFC system. Microreactor measurements revealed the reaction mechanisms as the fuel was transported through the three-catalyst device. The demonstration system showed that the fuel processing could be successfully integrated with the SOFC stack. (C) 2000 Elsevier Science S.A. All rights reserved.
Keyword:
micro-SOFC
pre-reformer
combustion
catalyst
butane
AI总结
对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
7.9
论文数:
3.7W
被引数:
15.0W
机构
暂无机构信息
引用论文
Carbon formation on and deactivation of nickel-based/zirconia anodes in solid oxide fuel cells running on methane在甲烷上运行的固体氧化物燃料电池中镍基/氧化锆阳极的碳形成和失活
CATALYSIS TODAY
IF5.3
Unraveling mechanistic features for the methane reforming by carbon dioxide over different metals and supports by TAP experiments
CATALYSIS TODAY
IF5.3

