.png){kind=icon}
返回
Solid Oxide Fuel Cell Modeling
.png){kind=icon}
OA
AI
DOI：10.1109/TIE.2008.2009516.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
This paper discusses the modeling of a solid oxide fuel cell using both lumped and distributed modeling approaches. In particular, the focus of this paper is on the development of a computationally efficient lumped-parameter model for real-time emulation and control. The performance of this model is compared with a detailed distributed model and experimental results. The fundamental relations that govern a fuel cell operation are utilized in both approaches. However, the partial pressure of the species (fuel, air, and water) in the distributed model is assumed to vary through the length of the fuel cell. The lumped model approach uses the partial pressure of the species at the exit point of the fuel cell. The partial pressure of the species is represented by an equivalent RC circuit in the lumped model.
Keyword:
Fuel cells
modeling
simulation
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
7.2
论文数:
1.8W
被引数:
9.8W
机构
引用论文
Discovery and Validation of New Potential Biomarkers for Early Detection of Colon Cancer.png)
PLoS ONEOAAI
PLoS ONEIF0
OAAI分享收藏Dynamic modeling of solid oxide fuel cell: The effect of diffusion and inherent impedance固体氧化物燃料电池的动态建模: 扩散和固有阻抗的影响
PREAI
分享收藏Development of models for analyzing the load-following performance of microturbines and fuel cells
PREAI
分享收藏
查看更多内容