.png){kind=icon}
返回
Solid oxide fuel cells utilizing dimethyl ether fuel
.png){kind=icon}
PRE
AI
DOI：10.1149/1.1496484.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
The feasibility and benefits of using an oxygenated fuel for solid oxide fuel cell (SOFC) operation were explored using dimethyl ether (DME). A model for the flow tube chemistry was used to predict DME gas-phase decomposition kinetics and species concentration profiles for temperatures ranging from 550 to 750degreesC. The predictions, which were in good agreement with mass spectral measurements, showed that in the absence of a fuel cell DME decomposed primarily into equal amounts of H-2,CH4, and CO above about 675degreesC. The same decomposition species were observed in catalytic reaction experiments at Ni-based anodes, but the mole fractions of the decomposition gases were much higher, between 550 and 650degreesC. Current-voltage measurements were made using SOFCs with 100 mum thick yttria-stabilized zirconia electrolyte supports, (La, Sr)(Co, Fe)O-3 cathodes, and 50 vol % Ni-based anodes. Maximum power densities for SOFCs supplied directly with DME fuel were 0.10 and 0.21 W/cm(2) at 600 and 700degrees C, respectively. No carbon deposition was observed in cells operated at temperatures up to 700degrees C. (C) 2002 The Electrochemical Society.
Keyword:
DIRECT OXIDATION
HYDROCARBONS
ANODE
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
3.3
论文数:
3.3W
被引数:
9.4W
机构
暂无机构信息
引用论文
Native arbuscular mycorrhizal fungi respond to rehabilitation in iron ore mining areas from the Eastern Brazilian Amazon.png)
Pedobiologia
PedobiologiaIF0
PREAI
分享收藏 没有更多内容
没有更多内容