返回
Solid polymer electrolyte-based high areal capacity all-solid-state batteries enabled with ceramic interlayers
DOI:10.1007/s12274-024-6667-5.png)
摘要
En 中文
基于固体聚合物电解质 (spe) 的全固态电池 (assb) 作为下一代储能系统的有希望的候选者,引起了广泛的关注。典型的assb需要高制造压力以实现高面积容量,然而,在该压力下,spe由于其低机械强度而挣扎并面临损坏或故障的风险。还缺乏对ASSB单元组装过程中复杂的应力和应变spe经验的研究。这里,选择陶瓷固体电解质作为中间层以解决组装过程中的应力-应变条件。结果,用基于SPE的复合电解质组装了LiCoO2负载量为12 mgcm-2的高面积容量assb。在室温下在1 mAcm-2的电流密度下对这些电池进行约200个循环。观察到电池在200次循环时的容量衰减低至每循环0.06% 次。这项工作确定了SPE在assb中应用的关键问题,并为具有高比能和长循环寿命的基于SPE的assb的设计提供了潜在的策略。
Keyword:
all-solid-state batteries
ceramic interlayer
solid polymer electrolyte
high areal capacity
期刊
IF:
9
论文数:
7.4K
被引数:
4.9W
机构
引用论文
Mechanical properties of the solid electrolyte Al-substituted Li7La3Zr2O12 (LLZO) by utilizing micro-pillar indentation splitting test利用微柱压痕分裂试验研究固体电解质Al取代Li7La3Zr2O12 (LLZO) 的力学性能
Zwitterion-doped self-supporting single-ion conducting polymer electrolyte membrane for dendrite-free lithium metal secondary batteries用于无枝晶锂金属二次电池的两性离子掺杂自支撑单离子导电聚合物电解质膜
3D finite element modelling on racetrack coils using the homogeneous T-A formulation使用均质t-a公式在赛道线圈上进行3D有限元建模
Cryogenics
IF0

