.png){kind=icon}
返回
Solid-State Lithium Batteries with Ultrastable Cyclability: An Internal-External Modification Strategy
.png){kind=icon}
PRE
AI
DOI：10.1021/acsnano.3c07306.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
A commonly used strategy to tackle the unstable interfacial problem between Li1.3Al0.3Ti1.7(PO4)(3) (LATP) and lithium (Li) is to introduce an interlayer. However, this strategy has a limited effect on stabilizing LATP during long-term cycling or under high current density, which is due in part to the negative impact of its internal defects (e.g., gaps between grains (GBs)) that are usually neglected. Here, control experiments and theoretical calculations show clearly that the GBs of LATP have higher electronic conductivity, which significantly accelerates its side reactions with Li. Thus, a simple LiCl solution immersion method is demonstrated to modify the GBs and their electronic states, thereby stabilizing LATP. In addition to LiCl filling, composite solid polymer electrolyte (CSPE) interlayering is concurrently introduced at the Li/LATP interface to realize the internal-external dual modifications for LATP. As a result, electron leakage in LATP can be strictly inhibited from its interior (by LiCl) and exterior (by CSPE), and such dual modifications can well protect the Li/LATP interface from side reactions and Li dendrite penetration. Notably, thus-modified Li symmetrical cells can achieve ultrastable cycling for more than 3500 h at 0.4 mA cm(-2) and 1500 h at 0.6 mA cm(-2), among the best cycling performance to date.
Keyword:
defect
LiCl
solid polymer electrolyte
lithium dendrite
interphase
期刊
IF:
16
论文数:
2.7W
被引数:
25.6W
机构
引用论文
Electro-Chemo-Mechanical Failure of Solid Electrolytes Induced by Growth of Internal Lithium Filaments内部锂丝的生长引起的固体电解质的电化学机械故障.png)
ADVANCED MATERIALS
OAAI
ADVANCED MATERIALSIF26.8
OAAI分享收藏In-situ constructed SnO2 gradient buffer layer as a tight and robust interphase toward Li metal anodes in LATP solid state batteries原位构建的SnO2梯度缓冲层作为LATP固态电池中Li金属阳极的紧密而坚固的界面
PREAI
分享收藏Efficient Construction of a C60 Interlayer for Mechanically Robust, Dendrite-free, and Ultrastable Solid-State BatteriesISCIENCEOAAI
ISCIENCEIF4.1
OAAI分享收藏Local electronic structure variation resulting in Li 'filament' formation within solid electrolytes局部电子结构变化导致固体电解质内Li “细丝” 形成NATURE MATERIALS
NATURE MATERIALSIF38.5
PREAI
分享收藏Li Penetration in Ceramic Solid Electrolytes: Operando Microscopy Analysis of Morphology, Propagation, and Reversibility陶瓷固体电解质中的Li渗透: 形态，传播和可逆性的Operando显微镜分析MATTEROAAI
MATTERIF17.5
OAAI分享收藏Atomistic Mechanism and Long-Term Stability of Using Chlorinated Graphdiyne Film to Reduce Lithium Dendrites in Rechargeable Lithium Metal Batteries使用氯化石墨炔膜减少可充电锂金属电池中锂枝晶的原子机理和长期稳定性NANO LETTERS
NANO LETTERSIF9.1
PREAI
分享收藏Double-Layer Polymer Electrolyte for High-Voltage All-Solid-State Rechargeable Batteries用于高压全固态可充电电池的双层聚合物电解质ADVANCED MATERIALS
ADVANCED MATERIALSIF26.8
PREAI
分享收藏Stabilizing the Interface of NASICON Solid Electrolyte against Li Metal with Atomic Layer Deposition通过原子层沉积稳定NASICON固体电解质对Li金属的界面
PREAI
分享收藏Engineering Janus Interfaces of Ceramic Electrolyte via Distinct Functional Polymers for Stable High-Voltage Li-Metal Batteries通过不同的功能聚合物对陶瓷电解质的工程Janus界面进行稳定的高压锂金属电池
PREAI
分享收藏
查看更多内容