返回
Solid-state optical scanning device using a beam combiner and switch array
DOI:10.1364/OPTICA.498402.png)
摘要
En 中文
Imaging optics cannot focus light beams emitted from different points onto one point with a lens. Therefore, fabricating a 3D image sensor with a focal plane array is challenging. We developed an imaging optics device with an intentionally shifted focal plane switch array comprising pixels with two optical antennas, a switch, and a receiver on a chip. We successfully illuminated a single point, received the reflected light with the same pixel, and scanned an illuminating target. The proposed system can serve as a 3D image sensor, with a detection range of 204 m for Lambertian reflectors with 94% reflectivity, and as abeam combiner for high-power lasers. (c) 2023 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement
Keyword:
PHASED-ARRAY
STEERING DEVICE
LIDAR
期刊
IF:
8.5
论文数:
2.4K
被引数:
2.1W
机构
引用论文
Doppler velocimeter and vibrometer FMCW LiDAR with Si photonic crystal beam scanner
OPTICS EXPRESS
IF3.3
Two-dimensional free-space beam steering with an optical phased array on silicon-on-insulator
OPTICS EXPRESS
IF3.3
Monolithic integration of broadband optical isolators for polarization-diverse silicon photonics用于偏振多样的硅光子学的宽带光隔离器的单片集成
OPTICA
IF8.5
Sub-wavelength-pitch silicon-photonic optical phased array for large field-of-regard coherent optical beam steering
OPTICS EXPRESS
IF3.3

