.png){kind=icon}
返回
Solving conformal wheel-rail rolling contact problems
.png){kind=icon}
PRE
AI
DOI：10.1080/00423114.2014.906634.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
The stresses between railway wheels and rails can be computed using different types of contact models: simplified methods, half-space-based boundary element approaches and finite element models. For conformal contact situations, particularly the contact between flange root and rail gauge corner, none of these models work satisfactorily. Finite element methods are too slow, half-space approaches ignore the effects of conformality, and simplified approaches schematise the elasticity of the material even further. This paper presents a thorough investigation of the conformal wheel-rail rolling contact problem. We use CONTACT's boundary element approach together with numerical influence coefficients, that are computed using the finite element approach. The resulting method is fast and detailed and can be embedded into vehicle system dynamics simulation. The results indicate that the contact area is longer and narrower, with smaller area and reduced stiffness, than is predicted by the half-space approach. The predicted maximum pressures are increased by 30%. Finally the longitudinal and lateral forces changed up to 15% of the Coulomb maximum.
Keyword:
wheel-rail contact
creep forces
conformal contact
half-space approach
BEM
FEM
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
V
IF:
3.9
论文数:
3.1K
被引数:
8.9K
机构
引用论文
The solution of frictional wheel-rail rolling contact with a 3D transient finite element model: Validation and error analysis.png)
WEAR
WEARIF6.1
PREAI
分享收藏
Creep forces in simulations of traction vehicles running on adhesion limit在附着极限上行驶的牵引车辆模拟中的蠕变力WEAR
WEARIF6.1
PREAI
分享收藏分享收藏
查看更多内容