.png){kind=icon}
返回
Spatial-varying multi-phase infill design using density-based topology optimization
.png){kind=icon}
PRE
AI
DOI：10.1016/j.cma.2020.113354.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Porous infill structures have been widely studied and used in additive manufacturing because of their lightweight and excellent mechanical properties. However, without considering graded multi-material infill pattern, existed infill design methods have not yet fully tapped the potential of multiple materials in structural design. In this paper, a systematic multi-phase infill design method is proposed to generate graded multi-material infill structures. The method builds upon a unified multi-material density-based topology optimization framework, in which a modified multi-phase material interpolation formulation is presented to represent the relationship between the stiffness matrix and design variables. To generate spatial-varying and multi-phase structures distributed in the interior of a design domain, the maximum local material volume constraints are imposed on each phase material in the neighborhood of each element in the design domain. A series of relaxations is introduced into the framework to facilitate the implementation of the gradient-based optimization algorithm. The whole design process is performed on a full-size finite element analysis, so it can avoid the separation of scales and naturally guarantee the optimized infills to be smoothly connected. The applicability and effectiveness of the proposed multi-phase infill generation model are then demonstrated by several typical numerical examples with the objective of minimum compliance. (C) 2020 Elsevier B.V. All rights reserved.
Keyword:
Multi-phase material
Infill design
Topology optimization
Functionally graded property
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
7.3
论文数:
1.3W
被引数:
5.6W
机构
暂无机构信息
引用论文
Topology optimisation of manufacturable microstructural details without length scale separation using a spectral coarse basis preconditioner使用光谱粗基预处理器在没有长度尺度分离的情况下对可制造的微观结构细节进行拓扑优化
OAAI
.png){kind=icon}
OAAI分享收藏分享收藏Stress-constrained shell-lattice infill structural optimisation for additive manufacturing用于增材制造的应力约束壳格填充结构优化
PREAI
分享收藏Buckling strength topology optimization of 2D periodic materials based on linearized bifurcation analysis基于线性化分岔分析的二维周期材料屈曲强度拓扑优化OAAI
OAAI分享收藏分享收藏
查看更多内容