Stabilizing Sn anodes nanostructure: Structure optimization and interfacial engineering to boost lithium storage

doi:10.1016/j.electacta.2021.139789

2022-02-01

PRE

DOI：10.1016/j.electacta.2021.139789

原文链接

原文求助

摘要

En 中文

The practical application of Sn-based material in lithium-ion batteries (LIBs) is hindered by the fast capacity fade due to the large volume expansion and the instability of solid electrolyte interface (SEI) film. Based on structural optimization and interfacial engineering theories, phosphorus-modified Sn nanoclusters encapsulated by graphene (P-Sn/NG) were designed and prepared through phosphorization process. Phosphorus modification optimize the nanostructure of the P-Sn/NG composite into nano/micro primary particles, and modify the material interface to an amorphous state. Thus, the stability of the SEI film was improved, the initial Coulombic efficiency was enhanced (82.2% on average), and the ion transmission efficiency was accelerated. As a result, the P-Sn/NG electrode showed superior cycling stability and rate capability (maintained 620.4 mA h g(-1) after 3200 cycles at 5.0 A g(-1) for half cells, as well as for full cells. Furthermore, the mechanism for performance improvement was revealed in detail. This work provides a new avenue for the practical application of Sn-based and other high-performance lithium-ion battery materials. (c) 2021 Elsevier Ltd. All rights reserved.

Keyword:

Sn nanoclusters

Phosphorus modification

Structural optimization

Interfacial engineering

Solid electrolyte interface

期刊

Electrochimica Acta

IF:

5.6

论文数:

4.1W

被引数:

12.6W

机构

shandong university

学者数:

9.5W

论文数: 6.4W

被引数: 94

引用论文

Enhanced cycling performance in heat-treated tin-based composite oxide anode for lithium-ion batteries 锂离子电池热处理锡基复合氧化物负极的循环性能增强

ELECTROCHIMICA ACTA

IF5.6

2013-01-01

PREAI

Lee, Seok Hee; Jee, Seung Hyun; Lee, Kang Soo; Nam, Sang Cheol; Yoon, Young Soo

Rational design of a Si-Sn-C ternary anode having exceptional rate performance 具有优异倍率性能的si-sn-c三元阳极的合理设计

ENERGY STORAGE MATERIALS

IF20.2

2019-02-01

PREAI

Lee, Byoung-Sun; Yang, Ho-Sung; Lee, Kang Hee; Han, Sungsoo; Yu, Woong-Ryeol

SnO2 Quantum Dots@Graphene Oxide as a High-Rate and Long-Life Anode Material for Lithium-Ion Batteries SnO2量子点 @ 氧化石墨烯作为锂离子电池的高倍率和长寿命阳极材料

SMALL

IF12.1

2015-12-17

348

PREAI

Zhao, Kangning; Zhang, Lei; Xia, Rui; Dong, Yifan; Xu, Wangwang; Niu, Chaojiang; He, Liang; Yan, Mengyu; Qu, Longbin; Mai, Liqiang

Li+ intercalcation pseudocapacitance in Sn-based metal-organic framework for high capacity and ultra-stable Li ion storage 用于高容量和超稳定Li离子存储的Sn基金属有机框架中的Li插层假电容

JOURNAL OF POWER SOURCES

IF7.9

2019-11-01

PREAI

Xia, Shu-Biao; Yao, Li-Feng; Guo, Hong; Shen, Xiang; Liu, Jia-Ming; Cheng, Fei-Xiang; Liu, Jian-Jun

Energy storage: The future enabled by nanomaterials 储能: 纳米材料带来的未来

SCIENCE

IF45.8

2019-11-22

1.3K

PREAI

Pomerantseva, Ekaterina; Bonaccorso, Francesco; Feng, Xinliang; Cui, Yi; Gogotsi, Yury

Structural and electrochemical study of fast Li diffusion in Li3V2(PO4)3 based electrode material

ELECTROCHIMICA ACTA

IF5.6

2017-03-01

PREAI

Ivanishchev, Alexander V.; Ushakov, Arseni V.; Ivanishcheva, Irina A.; Churikov, Alexei V.; Mironov, Andrei V.; Fedotov, Stanislav S.; Khasanova, Nellie R.; Antipov, Evgeny V.

Metal-Organophosphine Framework-Derived N,P-Codoped Carbon-Confined Cu3P Nanopaticles for Superb Na-Ion Storage 金属-有机膦骨架衍生的N，P-共掺杂的碳限制的Cu3P纳米粒子，用于极好的Na离子存储

ADVANCED ENERGY MATERIALS

IF26

2018-08-02

PREAI

Kong, Minhong; Song, Huaihe; Zhou, Jisheng

Phosphorus-doped tin oxides/carbon nanofibers webs as lithium-ion battery anodes With enhanced reversible capacity 具有增强的可逆容量的磷掺杂锡氧化物/碳纳米纤维网作为锂离子电池阳极

JOURNAL OF POWER SOURCES

IF7.9

2014-12-01

PREAI

Liu, Xiaowei; Teng, Donghua; Li, Ting; Yu, Yunhua; Shao, Xiaohong; Yang, Xiaoping