.png){kind=icon}
返回
Structural damage localization by combining flexibility and stiffness methods
.png){kind=icon}
PRE
AI
DOI：10.1016/j.engstruct.2005.04.017.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
A damage diagnosis technique based on changes in dynamically measured flexibility and stiffness of structures is presented. The objective is not only to detect the existence of damage, but also to locate it. The covariance-driven subspace identification technique is applied to identify structural modal parameters, and these are then used to assemble the flexibility matrix of dimensions corresponding to the measured degrees of freedom. The corresponding stiffness matrix is obtained by a pseudo-inversion of the flexibility matrix. Damage localization is achieved by a combined assessment of changes in these two measured matrices in moving from the reference state to the damaged state. Since the location of damage is given directly by the position of sensors, no geometrical measurements and finite element models are needed. When using output-only measurement data, an approximate mass-normalization of the mode shapes is adopted and an appropriate correction procedure is proposed. Numerical and experimental applications are considered, in order to examine the efficiency and limitations of the presented method. (c) 2005 Elsevier Ltd. All rights reserved.
Keyword:
structural damage diagnosis
damage localization
stochastic subspace identification
measured flexibility and stiffness
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
6.4
论文数:
2.1W
被引数:
8.7W
机构
暂无机构信息
引用论文
分享收藏Subspace-based fault detection algorithms for vibration monitoring基于子空间的振动监测故障检测算法.png)
AUTOMATICA
AUTOMATICAIF5.9
PREAI
分享收藏
查看更多内容