返回
Structural health detection sensor based on RFID technology
DOI:10.1063/5.0247756.png)
摘要
En 中文
In order to achieve structural health monitoring, a frequency-domain-based chipless radio-frequency identification sensor has been studied. The sensor is composed of an octagonal patch antenna and a Taconic CER-10 substrate, with overall dimensions of 24 x 24 x 1.27 mm3. Crack detection and strain detection simulations were conducted in the 3-6 and 6-12 GHz dual-frequency bands using HFSS. The results show that the sensor's resonant frequency decreases under tensile strain and increases under compressive strain. As the width, depth, and length of structural cracks increase, the sensor's resonant frequency shifts to lower frequencies. The designed structural health monitoring sensor can detect structural strain and damage with millimeter-level resolution through resonant frequency shifts. The sensor's maximum strain capacities under three different mechanical strains are -40% to 90%, -70% to 120%, and -40% to 90%, respectively. The sensor can detect changes in crack width, depth, and length without deformation, demonstrating a linear relationship between crack expansion and resonant frequency. (c) 2025 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license(https://creativecommons.org/licenses/by/4.0/).https://doi.org/10.1063/5.0247756
期刊
IF:
4.5
论文数:
2.8K
被引数:
1.2W
机构
暂无机构信息
引用论文
A Review of Radio Frequency Identification Sensing Systems for Structural Health Monitoring
MATERIALS
IF3.2
Multiresonance Chipless RFID Sensor Tag for Metal Defect Characterization Using Principal Component Analysis
IEEE SENSORS JOURNAL
IF4.5
Phase I study of gemcitabine and carboplatin in advanced non-small cell lung carcinoma
Lung Cancer
IF0
Complementary Split-Ring Resonator (CSRR)-Loaded Sensor Array to Detect Multiple Cracks: Shapes, Sizes, and Positions on Metallic Surface
IEEE ACCESS
IF3.6

