.png){kind=icon}
返回
Temperature evolution during field activated sintering
.png){kind=icon}
PRE
AI
DOI：10.1016/j.msea.2004.01.052.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Experiments and finite element simulations have been conducted to characterize the temperature distribution in the specimen/die/punch setup and its evolution during field activated sintering. Significant temperature gradients were found in specimen in both radial and axial directions. The punches experience the highest temperatures, while the minimum is on the outer die surface, which is where the temperature is monitored for control purposes. The temperature difference between the specimen and die surface increases with temperature. In order to know the true specimen temperature, a calibration-based correction with respect to the typically used surface temperature is necessary. (C) 2004 Elsevier B.V. All rights reserved.
Keyword:
activated sintering
finite element modeling
electrical field
powder densification
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
机构
暂无机构信息
引用论文
.png){kind=icon}
分享收藏Comparative study of fabrication of Si3N4/SiC composites by spark plasma sintering and hot isostatic pressing放电等离子烧结和热等静压制备Si3N4/SiC复合材料的比较研究
PREAI
分享收藏
History, Advances, and Challenges in Liquid Flow and Flow Boiling Heat Transfer in Microchannels: A Critical Review微通道内液体流动与流动沸腾传热的历史、进展与挑战：一项综述
PREAI
分享收藏
查看更多内容