返回
Textured Microcapsules through Crystallization
DOI:10.1021/acsami.0c22378.png)
摘要
En 中文
This work demonstrates the fabrication of surface-textured microcapsules formed from emulsion droplets, which are stabilized by an interlocking mesh of needle-like crystals. Crystals of the small-organic-compound decane-1,10-bis(cyclohexyl carbamate) are formed within the geometric confinement of the droplets, through precipitation from a binary-solvent-dispersed phase. This binary mixture consists of a volatile solvent and nonvolatile carrier oil. Crystallization is facilitated upon supersaturation due to evaporation of the volatile solvent. Microcapsule diameter can be easily tuned using microfluidics. This approach also proves to be scalable when using conventional mixers, yielding spikey microcapsules with diameters in the range of 10-50 mu m. It is highlighted that the capsule shape can be molded and arrested by jamming using recrystallization in geometric confinement. Moreover, it is shown that these textured microcapsules show a promising enhanced deposition onto a range of fabric fibers.
Keyword:
droplets
microcapsules
crystallization
interfacial
roughness
deposition
期刊
IF:
8.2
论文数:
6.1W
被引数:
48.4W
机构
引用论文
Formation of polymer microrods in shear flow by emulsification - Solvent attrition mechanism
LANGMUIR
IF3.9

