.png){kind=icon}
返回
The m4 3D printer: A multi-material multi-method additive manufacturing platform for future 3D printed structures
.png){kind=icon}
OA
AI
DOI：10.1016/j.addma.2019.100819.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
The advent of additive manufacturing (AM), also often referred to as 3D printing, has enabled the rapid production of parts with complex geometries that are either labor-intensive or unrealizable by traditional manufacturing methods. Many existing 3D printing technologies, however, only allow one material to be printed at one time, while many applications require the integration of different materials, which sometimes cannot be printed by one AM technology. In this paper, a novel multi-material mull-method (m(4)) 3D printer comprised of multiple AM technologies is presented as a solution to the current limitations. This printer fosters the advancement of AM by combining materials traditionally unable to be printed concurrently while adding functionality to printed parts. The m(4) 3D printer integrates four AM technologies and two complementary technologies onto one single platform, including inkjet (IJ), fused filament fabrication (FFF), direct ink writing (DIW), and aerosol jetting (AJ), along with robotic arms for pick-and-place (PnP) and photonic curing for intense pulsed light (IPL) sintering. The integration of these AM technologies and PnP into a single platform allows for rapid fabrication of complex devices, providing a wide range of functionalities with applications ranging from soft robotics and flexible electronics to medical devices.
Keyword:
Hybrid 3D printing
Multimaterial 3D printing
4D printing
Flexible electronics
Soft robotics
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
11.1
论文数:
4.7K
被引数:
4.9W
机构
引用论文
Novel ink for ambient condition printing of liquid crystal elastomers for 4D printing用于4D印刷的液晶弹性体环境条件印刷的新型油墨
PREAI
分享收藏Fast-Response, Stiffness-Tunable Soft Actuator by Hybrid Multimaterial 3D Printing通过混合多材料3D打印实现快速响应，刚度可调的软致动器
PREAI
分享收藏Multi-shape active composites by 3D printing of digital shape memory polymers.png)
SCIENTIFIC REPORTSOAAI
SCIENTIFIC REPORTSIF3.9
OAAI分享收藏Cobalt and zinc removal from aqueous solution by chemically treated bentonite通过化学处理的膨润土从水溶液中去除钴和锌
PREAI
分享收藏Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers在高度可拉伸的弹性体中嵌入应变传感器的3D打印ADVANCED MATERIALS
ADVANCED MATERIALSIF26.8
PREAI
分享收藏Defect-Tolerant Bioinspired Hierarchical Composites: Simulation and Experiment抗缺陷生物启发的分层复合材料: 模拟和实验
PREAI
分享收藏
查看更多内容