.png){kind=icon}
返回
Thermal performance augmentation of microchannel using curved rectangular winglet vortex generators having rectangular perforation
.png){kind=icon}
PRE
AI
DOI：10.1016/j.ces.2024.120860.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
This article innovatively introduces the application of punched curved rectangular wing vortex generators positioned on opposing sides of a rectangular microchannel. Through a comprehensive approach combining numerical simulations and experimental investigations, the flow dynamics and heat transfer performance of these VGs under turbulent conditions are thoroughly examined. This analysis is performed in the turbulent flow regime, specifically at Reynolds number ranging from 2500 to 3500. The governing equations are solved by using SST k-omega model. To evaluate the behavior of mixed vortices, a range of key metrics is utilized, including the Nusselt number ratio, friction coefficient ratio, and thermal enhancement factor (TEF). The study encompasses variations in opening angles (theta = 0 degrees, 5 degrees, 10 degrees, 15 degrees) and pitch ratios (PR = P/H = 15, 30, 45) to determine their impact on the overall system performance. The findings reveal that the punched curved rectangular winglet VGs effectively induce mixed vortices, leading to an enhancement in local heat transfer rates. However, the presence of fluid jets hinders the formation of other vortices. Compared to a smooth tube, the maximum TEF also experiences a 26 % rise. To validate the findings, the field synergy principle and entropy generation theory was utilized.
Keyword:
Perforated curved vortex generator
Microchannels
Jet flow
Heat transfer augmentation
Entropy generation
期刊
IF:
4.3
论文数:
2.3W
被引数:
5.5W
机构
暂无机构信息
引用论文
Entropy generation analysis for a circular tube with equilateral triangle cross sectioned coiled-wire inserts.png)
ENERGY
ENERGYIF9.4
PREAI
分享收藏Numerical study of flow and heat transfer enhancement of circular tube bank fin heat exchanger with curved delta-winglet vortex generators带有弯曲三角翼涡流发生器的圆管翅片换热器的流动和传热增强的数值研究
PREAI
分享收藏Performance optimization of a wavy finned-tube heat exchanger with staggered curved vortex generators带有交错弯曲涡流发生器的波浪形翅片管换热器的性能优化
OAAI
OAAI分享收藏
查看更多内容