返回
Three-dimensional multi-physics modelling and structural optimization of SOFC large-scale stack and stack tower
DOI:10.1016/j.ijhydene.2022.10.146.png)
摘要
En 中文
Multi-physics modelling of the Solid Oxide Fuel Cell (SOFC) stack requires significant computational resources. Design optimization of large-scale stacks and stack towers has always been a challenge in recent years. This study establishes a three-dimensional multi-physics model based on a two-step coupling using the BP neural network. The comparison between the novel model and the traditional fully coupled model in both accuracy and computing resource requirements are explored. The novel method has high effectiveness for modelling the large-scale stacks. Based on this, planar SOFC 50-cell stacks and 150-cell stack towers are simulated. The results show that, the flow uniformity of fuel distribution of the stack towers can decrease more than 30% comparing with the 50-cell stack, which leads to significant deterioration of the voltage and temperature distribution. The pa-rameters of manifold and buffer area and channel height of the stack tower is optimized to achieve better uniformity of flow and voltage distribution and lower temperature gradient simultaneously.(c) 2022 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
Keyword:
SOFC stack
Large-scale SOFC
Stack tower
Multi-physics simulation
BP neural networks
SOFC structure optimization
期刊
IF:
8.3
论文数:
5.5W
被引数:
23.1W
机构
引用论文
Electrical properties of Ni/YSZ cermets obtained through combustion synthesis通过燃烧合成获得的Ni/YSZ金属陶瓷的电性能
SOLID STATE IONICS
IF3.3
Exergy Analysis of a Two-Pass Reverse Osmosis (RO) Desalination Unit with and without an Energy Recovery Turbine (ERT) and Pressure Exchanger (PX)
Energies
IF0
CFD modelling and experimental validation of cell performance in a 3-D planar SOFC三维平面SOFC中电池性能的CFD建模和实验验证

