返回
Time-Modulated Array-Based Rotating Electric-Field Vector Method for Extracting Angle Information
DOI:10.1109/ACCESS.2025.3540052.png)
摘要
En 中文
This study proposes the time-modulated array (TMA) based rotating electric-field vector (REV) method as a means of extracting the angle information of the incoming fully correlated signals. By varying the delay parameter of the TMA signal, the REV signal can be formed, and its maximum or minimum can be used to extract the target angle. Furthermore, the target angle can be extracted by applying the inverse discrete Fourier transform to successive uniform samples of the first harmonic of the REV signal. Compared to the method that employs the magnitude ratios of the fundamental and harmonic components, the proposed method requires only the magnitude of the first harmonic component. Moreover, the angle information extracted is unambiguous. Additionally, this method can be extended to multiple target cases with the aid of a multi-element TMA and a complex REV method. In this case, inverse filtering is adopted to provide a higher angular resolution with a small loss in signal-to-noise ratio. An error analysis for the proposed method was performed by numerical simulation, and both the simulated and experimental results of the TMA-REV system fully validated the proposed method.
Keyword:
Harmonic analysis
Signal resolution
Filtering
Switches
Vectors
Signal to noise ratio
Radio frequency
Radar
Power measurement
Power harmonic filters
Time modulated array (TMA)
rotating electric-field vector (REV)
target angle extraction
single and multiple targets
discrete Fourier transform (DFT)
inverse filter
期刊
IF:
3.6
论文数:
9.8W
被引数:
29.4W
机构
引用论文
Kinetic and Equilibrium Studies on the Adsorption of Crystal Violet Dye using Kaolin as an Adsorbent
Single-Channel Spatial Spectrum Estimation Direction Finding by the Time-Modulated Linear Array时间调制线阵单通道空间谱估计测向

