.png){kind=icon}
返回
Tool Path Design of the Counter Single Point Incremental Forming Process to Decrease Shape Error
.png){kind=icon}
OA
AI
DOI：10.3390/ma13214719.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Incremental sheet metal forming can manufacture various sheet metal products without a dedicated punch and die set. In this study, we developed a two-stage incremental forming process to decrease shape errors in the conventional incremental forming process. The forming process was classified into the first single point incremental forming (1st SPIF) process for forming a product and the counter single point incremental forming (counter SPIF) process to decrease shape error. The counter SPIF gives bending deformation in the opposite direction. Furthermore, the counter SPIF compensates for shape errors, such as section deflection, skirt spring-back, final forming height, and round. The tool path of the counter SPIF has been optimized through a relatively simple optimization method by modifying the tool path of the previous step. The tool path of the 1st SPIF depends on the geometry of the product. An experiment was performed to form a circular cup shape to verify the proposed tool path of the 1st and counter SPIF. The result confirmed that the shape error decreased when compared to the conventional SPIF. For the application, the ship-hull geometry was adopted. Experimental results demonstrated the feasibility of the two-stage incremental forming process.
Keyword:
incremental sheet metal forming process
compensation
counter forming
tool path
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
3.2
论文数:
5.7W
被引数:
15.1W
机构
暂无机构信息
引用论文
.png){kind=icon}
Soft and Hard Slab Snow Dynamic Response to Explosives Used in Avalanche Hazard Mitigation软硬雪板对用于雪崩危险缓解的爆炸物的动态响应
PREAI
分享收藏分享收藏
查看更多内容